Design of Manmade Offshore Islands for Ice Forces
Approximately sixty percent of the undiscovered oil and fifty percent of the undiscovered gas probably lies in the sedimentary basins offshore Alaska (USGS 1980). Because of this hydrocarbon...
Design of Port and Coastal Structures for Ice Forces
Design of ice-affected port and coastal structures cannot be addressed in a few single specific terms, but must instead account for a matrix of elements differing at each site. Evaluation...
Design of Offshore Pipelines for Ice Environments
Design and installation of offshore pipelines in cold regions requires special care. Low ambient temperatures may cause increased friction losses in oil and gas lines due to wax crystallization...
Design of Bridges for Ice Forces
Sources of knowledge on ice forces and ice effects on bridges are listed and discussed briefly. Comments are made on experience of damage by ice and on the influence on bridge costs of...
Design of Navigational Structures for Ice Forces
An overview of ice conditions and the types of ice action that are hazardous to navigational structures is presented. Depending on the circumstances, ice failure against structures occurs...
Design of Submerged and Floating Structures
The objective of this paper is to present an overview of the state-of-the-art of ice engineering as applied to submerged and floating structures. Five specific design studies are reviewed,...
In Search of Ancient Engineers
Many examples of pre-Columbian civil works have been uncovered in North and South America. Some reflect well-organized technologies comparable to those of the Old World of the same time...
Structural Steel Details: Is Responsibility a Problem?
Because structural engineers are leaving design of structural steel connections to fabricators, the problem of responsibility for those details has arisen. This article explores a variety...
Pile Construction Practices in Arctic Regions: State-of-the-Art
Pile installation techniques in cold regions include drill and slurry, and driven methods for foundation designs. In the past, piles used for structural support in permafrost have consisted...
The Civil Engineer and the Decay of America's Infrastructure
With the infrastructure of the United States continuing to deteriorate, the problem becomes who will decide how much to spend in both repairing, maintaining and building new facilities...
Passive Solar and Daylighting Cut Building's Energy Use
The headquarters building for Gulf Mineral Resources Co. near Denver requires about one-quarter of the energy generally used in a new conventional building. A double skin provides a thermal...
Frame Program
A plane frame program for structural analysis that is short to program and easy to understand is presented. Included inl article is a complete print-out of the program with a step-by-step...
Oil Rigs Designed to Combat Arctic Ice
Exploration and drilling rigs now being designed for use in the Beaufort Sea must withstand ice forces never before encountered. Design approaches include using the geometry of these structures...
Existing Sewer Evaluation and Rehabilitation
Guidlines for the evaluation and rehabilitation of sanitary sewers are presented. The purpose and scope of sanitary sewer rehabilitation is described. The major emphasis is on filtration...
Mechanical Fastening of Structural Wood Members?Design and Research Status
A brief overview is provided of the current mechanical fastening research base as background for a discussion of future research needs and priorities. A summary is presented of the current...
Structural Analysis of Light-Frame Subassemblies
Conventional light-frame subassemblies have a long history of good performance. Until recently this performance could not be quantified adequately because of the complex ways in which...
Heavy Timber Structures and Bridges
Development and application of treated glued-laminated timber is a landmark event in structural engineering history. The inertia of this event has produced continued, rapid and dramatic...
An Overview of Structural Panels and Structural Composite Products
Plywood has been the principal structural panel for construction since the late 1940s. Today, structural panels are evolving into products such as composite panels, oriented strand board,...
Reliability-Based Design for Wood Structures: Potentials and Research Needs
Wood as a renewable resource is briefly discussed to provide an understanding of the complex nature of the relationship between its availability and its efficient use for engineered construction....
Wood Trusses and Other Manufactured Structural Components
Roof trusses, floor trusses, wood I and box beams, and glued-laminated timber are discussed. Some of the major recommendations for future research include improved analytical techniques...
Return to search