Concentration Measurements in Dense Leachate Plumes Using a Gamma Radiation System
An automated, nonintrusive technique is discussed that determines salt concentrations in dense leachate plumes. The dense plumes were introduced from a line source into a relatively narrow...
Influence of the Deposition of Anthropogenic Organic Substances from the Atmosphere on Ground-Water Quality
Large amounts of organic substances are emitted into the atmosphere as a consequence of human activity. The primary emissions as well as their atmospheric reaction products reach the soil...
Nitrate in Rural Water Supplies in North Carolina
Over 9000 rural water supplies in North Carolina were analyzed for nitrate, chloride, electrical conductivity and pH. Data were collected on well characteristics and potential sources...
Survey of Rural, Private Wells: Statistical Design
Half of Illinois' 38 million acres were planted in corn and soybeans in 1988. On the 19 million acres planted in corn and soybeans, approximately 1 million tons of nitrogen...
Potential Effects of Global Climate Change on the Central and Southern Florida Project
The possible impacts of some potential climate change effects such as sea level rise, changes in tropical cyclone intensity and frequency, and changes in precipitation and temperature...
Effect of Nile River Flow on Performance of Shoubrah Power Plant Cooling System
Shoubrah El-Khimah Power Plant was built in 1982. Its peak capacity is 1200 MW, generated by four units, three of them having one cooling water intake. The cooling water pumps suffer from...
Bed Forms of Nile River
In this paper, the observed bed forms for six different reaches of the Nile River in Egypt are described. The purpose of the study is to inquire whether or not the different available...
Application of Stable Channel Design Method
Systematic stable channel design methods are currently being developed by the US Army Engineer Waterways Experiment Station for use in the planning stages of local flood control projects....
Hydraulic Aspects of Grade Control Structures
This paper describes the function of grade control structures. The primary purpose of a grade control structure is to maintain or establish a desired bed elevation in a channel. Basically...
Operational Procedures for Estimating Bottom Exchange Rates
After briefly reviewing the terminology of the various bottom and water column exchange fluxes, the body of this paper summarizes five possible procedures for establishing operational...
Wind Generated Wave Resuspension of Sediment in Old Tampa Bay, Florida
Vertical profiles of velocity and suspended-solids concentration were measured at a scientific instrumentation platform in Old Tampa Bay during the passage of a cold front in March 1990....
Pump Station/Storage Opportunities for Urban Freeway Systems
This paper introduces the concept of utilizing underground storage to minimize both the initial cost and the long-term maintenance and operation costs of multiple pump stations for a freeway...
Optimizing Regional Detention Basins for Price Expressway
Stormwater runoff from the drainage area contributing to the Price-Santan Freeway is captured in regional detention basins which require a series of pump stations for evacuation. With...
Standardization of Culvert Flow Computations
Culvert flow computations are generally computed by the Federal Highway Administration's (FHWA) nemographs or its HY8 computer program, the U.S. Army Corps of Engineers'...
Overtopping Flow Spillway for Baldhill Dam, Sheyenne River, North Dakota
An existing gated spillway structure for Baldhill Dam and Reservoir (Lake Ashtabula, North Dakota) is not capable of passing floods up to the probable maximum flood (PMF) without overtopping...
Three-Dimensional Velocity Distribution at Open-Channel Diversions
A study is underway to develop an improved understanding of the 3-D flow pattern at 90? diversions. The main goal is to explain, via the velocity distribution, the behavior of sediment...
Fluidization Pipe Hole Spacing
Two-dimensional fluidization experiments are performed on fine (d50 = 0.15 mm) and medium coarse (d50 = 0.45...
Preventing Stilling Basin Abrasion
A 1:10 scale physical hydraulic model of Taylor Draw Dam outlet works was used to develop modifications to prevent back flow intake of rock into the stilling basin. Much of the back flow...
A Review of Sediment-Water Column Process Modeling and Future Applications in Waste Load Allocation
The capabilities of empirical modeling techniques are discussed and three promising mechanistic models to simulate sediment-water interactions are reviewed with respect to their possible...
Submerged Vane Projects for Bank Stabilization and Sedimentation Management
Submerged vanes are small flow training devices placed in a stream to eliminate or create secondary currents to direct sediment in a controlled fashion. In recent years submerged vanes...
Return to search