Design and Performance of Earth Spillways
The U.S. Department of Agriculture's Soil Conservation Service has designed and administered construction of a large number of dams utilizing grassed earth-lined auxiliary...
Mathematical Model of Wave Induced Pressures
A two-dimensional, implicit finite difference model was built to compute surface wave induced pressures under a gravity base foundation. The results showed considerable wave attenuation...
Performance Evaluation of Channels Stabilized with ARS-Type Low-Drop Structures
Field and hydraulic investigations of seven ARS-type low-drop grade-control structures located in Mississippi indicate that most of the structures become submerged during flows with recurrence...
Alternate Designs for the Sidewalls of Hydraulic Jump Stilling Basins
This paper discusses several alternate designs to replace the full height sidewalls of a type 2 U.S. Bureau of Reclamation stilling basin. The alternate designs that were investigated...
Gas Transfer at Hydraulic Structures
Field measurements of gas transfer at hydraulic structures are notoriously difficult and imprecise. A technique which measures the transfer of hydrocarbon tracer gases has been tested...
Dam Safety, Yes.; But What About Safety at Dams?
Design and construction of safe structures are the professional obligations of hydraulic engineers. However, there are environmental dangers with safe structures which engineers often...
Hydrologic Safety of Earth Dams
Hydrologic and hydraulic analyses are presented pertaining to the safety evaluation of an earth dam located downstream of another smaller earth dam. The upper dam is assumed to breach...
Hydraulic Effects on Swimming Fish in Fish Passage Structures
The implications of profile drag, weight, and buoyant forces on energy and power requirements of fish swimming through fish passage structures are considered. Where hydraulic grade lines...
Flow Through Fish Bypass Intakes
Hydraulic and computational fluid dynamic models were used to investigate the cause of the unequal intake flow distribution observed entering the three vertical intakes of the patented...
Physical Model of Local Scour at Grade Control Structures
A physical model of local scour occurring at grade-control structures was operated at an undistorted Froude number prototype-model scale ratio of 1:4. The maximum unit discharge in the...
Design of Riprapped Scour Holes for Flip Bucket and Overfall Spillways
Presented in this paper is a simple method of predicting pre-excavated scour depths and geometry for riprapped basins below flip bucket spillways. The input data needed for establishing...
A Numerical Solution Technique for Incompressible Flow
Presented is a numerical solution technique which employs the explicit predictor-corrector scheme of R.W. MacCormack in solving the governing two-dimensional equations of motion on a staggered...
Computer Aided Hydraulic Design of Open Channels
The results of tests by the U.S. Army Corps of Engineers District, Los Angeles (LAD), became a major part of the Corps' EM 1110-2-1601, Hydraulic Design of Flood Control Channels....
Terrestrial Trends for Building Technology in North America
This paper discusses new building technologies that will develop in the early 1990's to become significant technologies by the mid 1990's. The perspective is...
Concrete Lunar Base Investigation
Scientific and industrial operations on the moon require suitably shielded structures. Small structures for limited scientific activities may be constructed from structural elements prefabricated...
Lunar Cements/Concretes for Orbital Structures
The lunar surface is a rich source of inorganic building materials for large space structures. Lunar anorthosites can be processed into calcium aluminate cements in high temperature, high...
Concrete Habitable Structure on the Moon
This paper presents construction methods for a concrete habitable structure on the Moon. The study was conducted on the assumption that a concrete manufacturing plant has already been...
Construction Operations for an Early Lunar Base
Construction and excavation operations performed during the earliest stages of a manned lunar base pose a unique set of problems. This paper will describe six construction tasks that are...
A Methodology for Modeling Construction Requirements for a Manned Lunar Base
Before accurate modeling and planning of a manned lunar base can be accomplished, a methodology representing the construction-and-assembly process of lunar surface facilities must be developed....
Intelligent Construction Machines for Initial Planetary Shelter Fabrication
There have been any number of artists panoramas of initial base and habitat construction on other planetary bodies, notably recently the moon. Most of these conceptual drawings assume...
Return to search