CAPPS: Custom Architectured Parallel Processing System
CAPPS (Custom Architectured Parallel Processing System) is under development at Paragon Pacific Inc. , Torrance, CA, for the solution of computationally intensive engineering problems....
Guide to Investigation of Structural Failures
Prepared by the Research Council on Performance of Structures of ASCE. This report contains guidelines for conducting an investigation into the causes...
Lessons Learned from Design, Construction, and Performance of Hydraulic Structures
The intent of this publication is to provide lessons learned, both positive and negative, from activities associated with design, construction, and performance of hydraulic structures....
Managing Two Projects as One
The Port of Tacoma completed a new two berth container terminal and intermodal yard for Sea-Land in May 1985, only 26 months after signing a binding agreement. The project, which also...
Microtunneling: No Pipe Dream
Microtunneling machines developed in Japan and Germany can help install pipes, ducts and cables without disrupting urban activities at street level. A microtunnel is defined as having...
Keeping Sand at a Standstill
Construction of roads, railroads, pipelines and other facilities removes the native vegetation from sand dunes. As a result, sand movement starts and entire dunes may become active. This...
The Effects of P-Delta and Semi-Rigid Connections on Response Behavior of Inelastic Steel Frames Subjected to Cyclic and Seismic Loadings
A numerical method is presented for analyzing semi-rigid connected steel frames subjected to various time-dependent excitations with consideration of damping, nonlinear material behavior...
Approaches to Acceptable Risk
Acceptable risk has numerous meanings, that are derived from its having been defined in multiple arenas and by multiple groups. This paper describes several approaches to the question...
A System Framework for Engineering Risk Analysis
A mathematical system framework is developed to model a series of criteria called performance indices (PI) related to engineering risk in water resources. Such criteria include reliability,...
A Methodology for Risk-Benefit Analysis of Lock-and-Dam Rehabilitation in the U.S. Corps of Engineers
The U. S. Army Corps Engineers operates and manages some 250 locks and dams in major rivers and ports throughout the U. S. At present, many of these structures are thirty-five to forty-five...
The Ultimate High Tide
Unprecedented consumption of fossil fuels and clearing of vegetation have spurred interest in the greenhouse effect. Under this scenario, a build-up of carbon dioxide and other gases in...
The Hyatt Decision: Two Opinions�The Attorney/Engineers Speak
On the grounds of gross negligence, misconduct and fraudulent misrepresentation, Administrative Law Judge James B. Deutsch recommended that the licenses for the Kansas City Hyatt be revoked...
Computer Assisted Pavement
In Rancho Palos Verdes, Calif. a 4,300 ft. long test installation of the Contained Rock Asphalt Mat (CRAM) Pavement System is expected to have a 50 year life. It cost a third less than...
Structural Applications of SIFCON
SIFCON (Slurry Infiltrated Fiber CONcrete) is a relatively new composite material utilizing steel fibers in a cement-based matrix. It differs from conventional steel-fiber-reinforced concrete...
Behavior of Concrete Bulkheads in Salt Drifts
Parameters studies of the behavior of a plug made from expansive concrete have been performed. Such plugs are now being field tested for sealing boreholes, shafts and drifts at an underground...
Effects of High Pressure and Temperature on HCP
A modification of fabrication techniques for cement paste can significantly affect its properties. Specifically, the static compressive strength can be increased over that of specimens...
Avoiding Cracks in Brickwork
Many aspects of movement and differential movement have been discussed. However, other movements and effects of movement that have not been discussed may also affect the performance of...
The Basics of Water-Resistant Brick Walls
Water-resistant masonry walls of burned clay or shale brick are the result of a conscious effort to produce them, by everyone involved in their creation. Furthermore, owner maintenance...
Influence of Surface Conditions on Surface Temperature
Geotechnical engineers working in areas of discontinuous permafrost are frequently faced with the necessity of designing facilities with a minimum of thermal disturbance. Construction...
Building Arrangement and Site Layout Design Guides for On Site Low Level Radioactive Waste Storage Facilities
This paper will discuss a typical storage facility and address the design considerations and operational aspects that are generally overlooked when designing and siting a low level radioactive...
Return to search