Surface Roughness with Erosion of Earth Channels
A determination of the stresses effective in soil detachment is essential in determining erodibility. The soil roughness that exists during testing and in natural channels is a key element...
Ports '89
This is a collection of the technical papers presented at the triennial Ports '89 Conference held in Boston, Massachusetts in May 1989. Authors, although predominantly from...
Boundary Element Methods in Structural Analysis
Tutorial and state-of-art aspects of the Boundary Element Method (BEM) are combined with applications in structural analysis in order to provide information about the advantages of this...
Electricity From Air
After a decade of research and dozens of feasibility studies at sites around the country, the first Compressed Air Energy Storage (CAES) plant in the U.S. is under construction at McIntosh,...
Breakwater Choices
Most of the maritime breakwaters built throughout the world are of the rubble mount type, with a protective armor constructed of artificial blocks. Despite the multitude of different shapes...
Bullwinkle
The 1989 Outstanding Civil Engineering Achievement is an offshore oil production platform named Bullwinkle, a structure in the Gulf of Mexico that is taller than the Sears Tower, shaped...
Analysis of Local Scouring
An understanding of local scouring is very important for the safety and integrity of hydraulic structures. The location, shape, and magnitude of the scour hole is a function of dynamic...
Predicting Human Instability in Flood Flows
The delineation of high flood hazard zones within a flood plain is usually independent of the parameters that constitute a life threatening situation. In order to define human instability...
Application of Hydraulic and Sediment Transport Principles in the Design of Tidal Exchange Structures
This paper presents a procedure for the analysis and design of tidal exchange structures, such as tidal gates and training dikes. In lieu of over generalized theories or complicated modeling...
Groins and Vanes Developed Basing Upon a New Concept of Bank Protection
At curved bends, scour at the outer bank always accompanies deposition at the inner bank. A highly efficient river course for flood flow is considered to have a small lateral gradient...
Beach Erosion Protection Methods: Case Study of Dar City Tanzania
Coastal Tanzania has been experiencing severe beach erosion. Beach erosion is much felt in coastal cities like Dar es Salaam, Tanga etc. Beach erosion in Dar es Salaam has caused damage...
State-of-the-Art Report: Mexico
Design recommendations for groins and spur dikes are presented. For groins the most important ones are: to build them with sloping crests, orientated downstream and maximum spacing of...
Relief of an Urban Storm Drainage System
The Peaks Branch storm sewer system was designed in the 1930s to drain 5.7 square miles of East Dallas. Subsequently, development blocked the emergency overflow paths and many areas are...
SWMM Application in Indian River County, Florida
The EPA's Storm Water Management Model (SWMM) was used to simulate drainage canal system network within Indian River County, Florida. Runoff and Extran module of the PCSWMM...
An Ongoing Investigation of Residual Suspended Material Transport in Central San Francisco Bay, CA
A study of suspended material transport in San Francisco Bay, California, is presently underway by the U.S. Army Corps of Engineers. This paper describes preliminary numerical model and...
Experience with Cavitation in High Pressure Slide Gates
The Bureau of Reclamation has many years of experience in the design and operation of high pressure slide gates. This paper discusses the historical use of high pressure slide gates by...
Design, Construction and Testing of Repairs to the Low Level Outlets at Terzaghi Dam
Operation of the low level outlets (LLOs) at Terzaghi Dam in southwestern British Columbia resulted in severe cavitation at operating heads significantly lower than design. Modifications...
Handling of Intake Bulkhead at King Talal Dam
During raising of King Talal Dam in Jordan in 1986, the existing intake wheel gate provided at the inlet of the project Low Level Outlet Works (LLOW) tunnel was found inadequate to withstand...
Hydraulic Model and Prototype Experience on Old River Overbank Structure
Physical hydraulic model tests of the Old River overbank structure were conducted to investigate the hydraulic performance of the stilling basin and evaluate riprap stability and scour...
Extreme Flood Probability Estimates in Practice
Selecting the safety design flood for a dam or siting structures where flooding would cause severe social or economic disruption requires balancing the likelihood and consequences of failure...
Return to search