Service Life of Underground Concrete Structures
The service life of underground concrete depends on both the physicochemical properties of the concrete materials and the properties of the in-service environment. The major factors controlling...
Fiberglas Reinforced Plastic Rebars in Lieu of Steel Rebars
Fiberglass reinforced plastics have recently been introduced in the market in the form of rebars for concrete reinforcement. The light weight, corrosion resistance and non-magnetic properties...
Surface Treatments for Concrete
The US Army Corps of Engineers initiated in 1984 a research program designated Repair, Evaluation, Maintenance, and Rehabilitation (REMR), one of the work units being the evaluation of...
Evaluation and Remediation of Construction Defects in Tilt Wall Panels
Both the surface appearance and structural safety were of concern to the Owner of a five year old warehouse structure that was experiencing delamination of tilt-up wall panels. Delamination...
Use of Copper Slag for Construction Purposes
Standard laboratory test results on the fine- and coarse-grained fractions of a copper slag have been presented. Based on the results of these tests, the possible use of the fine fraction...
Production of Masonry Blocks for Developing Countries
The need for nuturing of low cost building materials industry in developing countries has long been recognized throughout the world. costs of building materials. Therefore, construction...
Seismic Resistant Low-Cost Masonry Buildings in Peru
Future housing in developing countries will be provided mainly in medium rise, four to six stories, bearing wall masonry buildings. This paper reports on the rationality behind this political...
Sprayed-On Polymer Mortar Construction
Sprayed-on polymer mortar has been used to construct low-cost, lightweight structures in a variety of locations. The addition of the two-component additive to one cubic yard of mortar...
Fatigue of Reinforcement in Partially Prestressed Beams
A summary of the findings of an extensive experimental program on the fatigue characteristics of partially prestressed concrete beams is described. It is observed that the stress range...
A Summary and Review of Fatigue Data for Mechanical and Welded Splices in Reinforcing Bars
Published reports pertaining to fatigue tests of welded and mechanical splices in reinforcing bars were reviewed. It was observed that most specimens fractured in the reinforcing bar adjacent...
Fatigue Strength of Welded Steel Mesh
Welded steel mesh (WSM) is prefabricated by welding cold-drawn wires in a grid-like mesh. Engineers avoid using WSM as main reinforcement in highway structures due to their lack of knowledge...
The Fatigue Performance of Welded Joints in a Marine Environment
The fatigue lives of plate-plate, pipe-plate, and tubular welded joints tested in seawater under free corrosion, optimum cathodic protection and cathodic overprotection measured in the...
Inspection Strategies for Offshore Structures
The fatigue limit state is the governing limit state for the structural dimensions in several parts of offshore structures. Prediction of the fatigue life of tubular joints and other welded...
Effect of High Frequency Response on Fatigue of Offshore Structures
Welded steel specimens have been tested under several loading spectra to determine the effect on fatigue life of high frequency components in the psd of the stress or strain in the joint....
Low-Cycle Fatigue Reliability of Offshore Structures Subjected to Earthquakes
This paper develops and implements a methodology for predicting probabilistically the damage an offshore structure will experience in an earthquake. The analysis begins with the probability...
Concrete Strength-Quality Assurance
The usual criterion for establishing grades of structural concrete is the compressive strength measured in an arbitrary manner on a standardized specimen stored in a stipulated fashion...
Early Age Strength Detection for In-situ Concrete
In recent years it has become increasingly beneficial to know the quality of concrete as soon as possible after it has been placed. This is especially true for high-rise concrete buildings...
Lessons Learned in Laboratory and Field Evaluation of Accelerated Strength Tests for Quality Control of Concrete Pavements
This paper describes the results of an accelerated strength testing program performed to evaluate flexural strength potential at 28- and 90-days. Based upon a literature review of previous...
Flexural and Shear Moduli of FRP Beams
The analysis and design of structures of pultruded fiber reinforced plastic (FRP), constant cross-section, commercially produced, beams is discussed in the context of a shear deformation...
Development of High Strength Composite Cables
Fiber reinforced composite materials offer significant advantages over conventional materials, for such factors as corrosion resistance, lighter weight, and higher strengths. These advantages...
Return to search