Maximizing Utility of Interfaces for Hydrologic Models
From the time a watershed layout has been determined, there is sufficient information for a computer to generate a command sequence for hydrologic simulation. Recognizing this fact, an...
On the Choice Between Annual Flood Series and Peaks Over Threshold Series in Flood Frequency Analysis
Statistical techniques are often used to estimate extreme flood events for the design of a flood-control structure or for any other flood-related purpose. Two kinds of models are commonly...
Comparison of Hydrograph Simulation Techniques Used in Structural Design and Watershed Systems Modeling
This paper describes a basin study in which traditional unit hydrograph analysis methods were compared to the E. J. Inman hydrograph technique. Study results indicate that, where suitable...
Hydraulics of Enlarging Cannonsville Reservoir
This paper describes the hydraulic studies performed for enlarging the Cannonsville Reservoir with a gate system which could raise the normal storage level without having an adverse effect...
Hydrologic Runoff Modeling of Small Watersheds: The Tinflow Model
TINFLOW is a PC-based Geographic Information System (GIS) that utilizes the Triangulated Irregular Network (TIN) and associated data structures, together with a deterministic, finite difference...
Analysis of Drought Indicators
The Pennsylvania Department of Environmental Resources currently monitors five parameters in its regional water supply management program. These are: (1) accumulated precipitation deficit;...
USDA-Water Erosion Prediction Project (WEPP)
The USDA-Water Erosion Prediction Project (WEPP) will develop improved erosion prediction technology based on modern hydrologic and erosion science that will be process-oriented and conceptually...
Automatic Calibration of Conceptual Rainfall-Runoff Models
An automatic calibration strategy applied to land and channel components of the National Weather Service River Forecast System is outlined. Aspects discussed include the objective function...
A Modal Coupling Procedure for Structural Dynamics
A method is presented for synthesizing the real modes of substructures to obtain the complex modes of the combined structure. These complex modes properly include the nonclassical damping...
A Comparative Study of Different Base Isolators
A comparative study of the effectiveness of four different base isolators is carried out. The structure is modeled as a rigid mass and the accelerograms of the North-South component of...
Response of Structures to Horizontal-Vertical Earthquakes
In the present work, the responses of a class of hysteretically nonlinear structures subjected to the combined horizontal and vertical random ground accelerations are studied. A massless...
Reliability of a Frictional System with Uncertainty
In recent years, more emphasis has been placed on the study of random vibration of structures with uncertain parameters. Most of these have dealt with second order statistics of the response...
Seismic Response of Simple Structures with Coulomb Damping
A single story structure incorporating a floor-sliding mechanism for dissipation of vibration energy through Coulomb friction damping is examined. The response of this structure is evaluated...
Cracking of a Tilt-Up Structure Due to Dynamic Loads
The extensive cracking of a tilt-up reinforced concrete structure is discussed. The site investigation revealed horizontal cracks at two feet to seven feet above a mezzanine level which...
Dynamic Behavior of R/C Buildings in Vi? del Mar, Chile
The Chilean earthquake of 3 March 1985 resulted in an effective peak acceleration of 0. 36g in the coastal city of Vina del Mar. The city had an inventory of over 400 reinforced concrete...
Methods for Improving the Seismic Response of Concentrically Braced Steel Frames
This paper briefly reviews various factors contributing to the poor performance occasionally observed in concentrically braced steel frame structures during recent earthquakes. Several...
Unusual Shaped Highrise Buildings in Seismic Zone
The structural concepts, seismic analysis and design of five recent highrise structures are presented in this paper. The paper deals with the problem of multistory buildings having 'structural...
The Design and Construction of the Washington State Convention and Trade Center Over Interstate 5
The Washington State Convention and Trade Center is a 10-level, 1,000,000-square foot facility constructed over Interstate 5 in downtown Seattle. The project spans over three city streets...
Unified Approach to Reliability-Based Structural Optimization
The purpose of this paper is to present a unified approach to reliability-based structural optimization. The emphasis is placed on recent developments in the field including optimal design...
Serviceability Limit States in Load Space
Deflection and elastic limit state curves are drawn in load space using a nonlinear structural analysis program. Use of load space simplifies computation of point estimates of serviceability...
Return to search