Evaluation of a Large Aggregate Asphaltic Layer in an Airside Pavement
A new analytical method of designing large aggregate asphalt mixes (LAM) was used to design a thick asphalt base layer for an aircraft taxiway. The results of an analysis on the material...
North Ramp Pavement Evaluation/Rehabilitation?Houston Intercontinental Airport
The North Ramp at Houston's Intercontinental Airport is approximately 23 years old and serves Terminals A and B and also serves as a primary taxiway. Prior to having the new international...
Recycling Concrete and Asphalt Pavements Rehabilitation of Runway 18R-36L Orlando International Airport
The subject project consisted of reconstructing an air carrier runway utilizing a concrete keel section with asphalt overlays along the runway edges. Associated taxiways were rehabilitated...
Evaluation of Runway Roughness for Fighter Jets
A new roughness evaluation procedure is needed, especially, when dealing with modern fighter jets. To this end, a comprehensive pilot attitude survey was conducted in Israel in order to...
Heavy Aircraft Damage to Rigid Airport Pavements
A theoretical solution is presented for the damage caused by heavy aircraft at the transverse joints in a rigid airport pavement. Large stresses in the subgrade generate significant permanent...
Evaluation of Elastic Layered Theory for Airfield Pavements, Using Nondestructive Testing and In-Place Response Measurements
Airfield pavement deflections measured under actual aircraft loads were compared to predictions based upon elastic layer theory and moduli backcalculated from failing weight deflectometer...
Measurement and Analysis of Airside Pavement Roughness at the Dallas/Fort Worth International Airport
In May 1990, Dallas/Fort Worth International Airport management contracted with Harding Lawson Associates to implement a pavement management system for that airport. In this implementation,...
Use of Porous Friction Course to Retard Reflection Cracks in Bituminous Overlays
Porous Friction Courses (PFC) are open-graded, high air void, bituminous mixtures that are applied to pavement surfaces to improve skid resistance. In 1989, PFC was used as an interlayer...
Evaluation and Overlay Design of Airport Pavements
Heavy weight deflectometer (HWD), a heavier version of the falling weight deflectometer, enables detailed evaluation of airport pavements to be performed using a rapid a non-destructive...
Rehabilitation of Runway 4R-22L at Chicago's O'Hare International Airport
This paper describes the systematic process that was used to develop a rehabilitation strategy for the busiest runway at O'Hare International Airport. Any rehabilitation alternative that...
Use of Surface Treatments on Airport Pavements
Asphalt is generally used as the surfacing for flexible airport pavements with airline passenger jet aircraft. In Australia and its neighbouring territories, surface treatments (seals)...
An Introduction to APM Systems and Applications
An Automated People Mover (APM) is an advanced transportation system in which automated driveless vehicles operate on fixed guideways in exclusive rights-of-way. These differ from other...
Integrating Waiting Time in the Design of a Transportation System for Short to Intermediate Distances
This paper addresses passenger perceptions of short to medium distance public transportation systems. The concept of the weighted total transportation time (WTTT) is introduced, integrating...
Jacksonville's ASE Crosses the River
After over three years of operation, the Jacksonville (Florida) Automated Skyway Express (Skyway) downtown people mover system is expanding. The Jacksonville Transportation Authority (JTA),...
Las Vegas?A Significant APM Market
Las Vegas, the gambling and entertainment center of the nation, contains the world's largest concentration of hotels and casinos, and attracts over 18 million visitors a year. APMs have...
Expansion of the Newark International Airport Monorail
The Port Authority of New York and New Jersey (PA) has planned, designed, and begun constructing an APM system at the Newark International Airport (EWR). This system, called the Monorail,...
Designing APM Circulator Systems for Major Activity Centers: An Interactive Graphic Approach
An interactive graphic computer program, called Circulator, is used to design an APM circulator system for a large and complex major activity center. The design process is intuitively...
Simulation Modelling of PRT Systems
Background is provided on a computer model that simulates operation of a Personal Rapid Transit (PRT) system. A description is given of how the PRT model is constructed of track segments...
American Airlines' TrAAm System Vehicle Modification/Conversion Program
In October of 1992 American Airlines inaugurated a new people mover service among four stations within its two-terminal complex at the Dallas/Fort Worth Airport (D/FW). Named the `TrAAm,'...
APM Microprocessor Based Enhancements
Many recent product enhancements have helped to move automated people mover (APM) technology toward the 21st Century with far reaching prospects for applications in the mass transit industry....
Return to search