ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Imperfections and Thin-Walled Bars Behaviour
Experimental and theoretical observations allowed us to present some new conclusions concerning the proper, and safe designing of the structures composed of thin-walled bars (TWB). These...

Comparison of Two different Models of a Shell Roof
The main purpose of this study is to compare a physical model of a shell roof with a theoretical model of the same shell roof in order to verify the reliability of the Homeostatic Model...

Sensitivity and Optimum Structural Design
Modern design requires more advanced considerations leading to light and safe structures. One of the way to reach this aim is through structural optimization. Today's computational possibilities...

Possibilities and Problems of Latticed Structures
Several fundamental aspects of space frames which are sometimes referred to as latticed structures are discussed. Terminology of the structural system is first considered. Special features...

Analysis and Design of a Double Layer Barrel Vault with a Large Span
The roof of coal storage in JiaXin Power Station is a double-layer barrel vault. This roof covers span of 103.5 M and a longitudinal span of 88.0 M. The height of this space truss is 3.5...

Structural Integrity of Space Trusses
Space trusses of the double layer grid configuration can experience rapid propagation of failure in the ultimate load condition and thus are potentially vulnerable to progressive collapse...

Optimal Design Conception of Grid Domes in Practice
In this paper, the optimal design conception of grid domes in practice is presented. The classical dome shell structures covering some irregular boundaries often seems not to be satisfied...

Discrete Field Stability Analysis of X-Braced Lattices
The three-dimensional X-braced lattice is used as a compression member in structures ranging from the long span roof of buildings to radio and television antennas. In such cases the design...

Simulation Procedure for Buckling Behaviors of a Reticular Dome
Complex behaviors of the ball-joint connection, especially used in steel space structures, are expressed in the numerical model to confirm the estimative ability of such a model by comparing...

Large Deformation Analysis of Lattice Truss Structures Including Hysteretic Material Behavior
A methodology is presented to analyze lattice truss structures including both material and geometric nonlinearities. Modeled member material behavior modes include: buckling, yielding,...

Buckling of Single Layer Latticed Dome under Uniform Gravity Load
This paper reports on experiment and numerical analysis relating the buckling of a single layer latticed dome under uniformly distributed nodal gravity load at the dome central portion....

Nonlinear Buckling Response of Single Layer Latticed Barrel Vaults
Elastic overall buckling of single layer latticed barrel vault roof structures under static vertical loading is investigated using a fully nonlinear finite element solution procedure and...

Collapse Behavior of Double-Layer Space Truss Grids with Member Buckling
The results of collapse tests of over twenty space truss grids with elastic buckling of members are reviewed. The space truss grids include three types, that is, square-on-square, square-on-diagonal...

Membrane Structures: Technological Innovation and Architectural Opportunity
Presented is a list of materials used in building an airhouse. There are so many other moves in tensile structures and the present interest is in ETFE foils because of light transmission/cost...

Georgia Dome Cable Roof Construction Techniques
This paper will provide a case study of the construction of the Hypar-Tensegrity Cable Roof for the Georgia Dome. The paper will emphasize innovative computer analysis of the construction...

Study on Mechanical Characteristics of Light-weight Complex Structure Composed of a Membrane and a Beam String Structure
This paper aims at studying a new type of Beam String Structure, in which a membrane is used as finishing material. This paper reports on the mechanical characteristics of this structure,...

Effects of Spatial Triangulation on the Behavior of Tensegrity Domes
A number of long span 'tensegrity' dome type structures have recently been realized pursuant to the inventions of R. Buckminster Fuller and David H. Geiger. These structures have demonstrated...

Active Control of Axial Forces in Beam String Space Frames
The present work discusses a formulation for active control of axial forces of strings in beam string structures to dynamically and/or statically reduce the responses, and proves both...

Fabric Roof Design Responds to New Technologies
A combination of newer synthetic materials and advanced structural design technologies have given contemporary tensioned fabric roofs vastly improved energy performance and far greater...

A Practical Design and Construction of Tension Rod Supported Glazing
In designing a glass skin-covered space, for the atrium, entrance hall or other core part of a building complex, the high openness and quality requirements of the space often lead to the...

 

 

 

 

Return to search