Automatic Control of Flocculation Processes
A control system for flocculation, used in water and wastewater treatment operations is being developed. The approach is based on detailed particle size distribution measurements of influent...

Flow through Vertical Barrier Screens?Numerical Model
A simple one-dimensional numerical model based on the energy equation is developed to predict the normal flow distribution through barrier screens composed of several vertical segments...

Experimental Uncertainty and Measurement Errors in Hydraulic Engineering
The Task Committee on Experimental Uncertainty and Measurement Errors was formed to provide information and guidance on current practices used for describing and quantifying measurement...

Analysis of Exceptional Meteorological Conditions on July and August in Conakry
Conakry is a zone that receives more precipitation than other countries in West Africa. Sometimes the quantity is more than 4,000 mm per year. Strong rainfalls are observed between July...

Hydraulic Effects of Habitat Structures in Flood Control Channels
Three field sites have been established and laboratory flume experiments begun to assess the effect of habitat enhancement measures on water-surface profiles and local scour in flood control...

Uncertainty Analysis of Reservoir Sedimentation
In estimating reservoir sedimentation, a number of uncertainties arise. These are related to annual streamfiow, sediment load, sediment particle size, trap efficiency, and reservoir operation....

Distributions of Return Flow in Navigable Waterways
Physical impacts of barge traffic on the riverine environment have drawn increasing attention from resource managers of the Upper Mississippi River System (UMRS). Return flow, which can...

Automated Tools for Spatially Distributed Rainfall/Runoff Modeling
A watershed modeling system (WMS) has been developed to address the needs of surface water rainfall/runoff computer simulations. WMS, developed at the Engineering Computer Graphics Laboratory...

Development of a Hydrologic Model with Both Spatially Distributed and Physically Based Capabilities
A distributed hydrologic model is developed at The Pennsylvania State University for use with rasterized data bases. The purpose of the Terrestrial Hydrologic Model or THM is to investigate...

Runoff Computation Using Spatially Distributed Terrain Parameters
A spatially distributed unit hydrograph is developed based on linear system theory applied to subareas or cells within a watershed Each cell has a unique unit response function independent...

Simulation of Catchment Response Using RC Network
This paper describes a simple physically-based distributed parameter hydrologic model of catchment response using a network of capacitors and resistors. The effect of topography is modeled...

Model for Water Quality in Periphery of Distribution Systems
A model is presented for water travel time and chlorine concentration in periphery dead ends of the water distribution system. The model is developed under the premise that residential...

Tributary No. 9 Restoration, Maryland State Highway Administration
The Maryland State Highway Administration agreed to accomplish restoration of 1,100 feet of stream channel as part of a mitigation agreement with the U.S. Army Corps of Engineers, Baltimore...

Field Determination of Flow through a Pressure Regulating Valve
This paper presents a computer methodology to calculate flow through a pressure regulating valve for different opening percentages and a given pressure differential. The methodology is...

Estimation of High Spring Floods Causing Inundation in Non-Studied Rivers of the West Siberian Plain
Spring flooding is the main and the most abounding in water period in flow regime of West Siberian rivers. As a result, there is powerful and wide inundation on relief of West Siberia....

Direct Measurement of Turbulence Structures in a Standard Jar Test Tank Using PIV System
Particle image velocimetry (PIV) is applied to the measurement of instantaneous two-dimensional velocity fields in a standard 2-liter jar test tank for several different impeller speeds....

Capillary Pressure-Saturation Relationships in Fracture
Understanding and quantifying unsaturated flow through fractures in rocky slope is important for design and construction of drainage system in large-scale hydraulic engineering. The data...

An Economy and Risk Analysis of Installed Capacity Expansion at the Three Gorges Power Plant
This paper studies the possibility and economy of peak-regulation operation during flood period at the Three Gorges reservoir, which will at the same time satisfy the requirements for...

Reducing Model Study Time and Improving Reliability
Historically, the majority of effort expended in computer modeling of physical systems has gone into the numerical algorithms used in the computer programs. Other aspects of modeling have...

Risk of Extreme and Catastrophic Events
Assessing the extreme tails of a probability distribution, where events of very low probability can nevertheless lead to catastrophic outcomes, is one of the most widely discussed and...

 

 

 

 

Return to search