Bond Performance of Reinforcing Bars Embedded in Fiber Reinforced Concrete and Subjected to Monotonic and Cyclic Loads
The primary variables investigated were fiber content and loading history. The reinforcing bar size was ASTM #5. Steel fibers with hooked ends were used with four fiber contents, namely;...
Iterative Global/Local Finite Element Analysis
In spite of the advances in computer technology, there is still a need for more computationally efficient methods for performing stress analysis. One approach which is receiving increasing...
Damage Prediction in Laminated Composites with Continuum Damage Mechanics
A finite element model is developed for laminated composite plates experiencing fatigue load induced microstructural damage. Continuum damage mechanics based constitutive relationships,...
Long-Term Strength Gain or High Strength Concrete as Monitored by Drilled Cores
An evaluation was made of the relationship between standard cylinders, four-inch by eight-inch cylinders, and drilled cores. The evaluation results showed that the strengths obtained from...
Recognition and Avoidance of Details That Adversely Affect the Performance of Exposed Wood Members
Factors that affect the deterioration of wood in structures are reviewed. Important points regarding wood-moisture relationships are noted. The requirements for decay of wood by fungi...
Protection of Wood Designs in Adverse Environments
Engineers and architects are becoming increasingly aware of the risks of poor wood design practices and the benefits of using wood properly. This paper addresses biological factors that...
Long-Term Performance Reliability of Wood Materials
The United States faces a major task in maintaining and rebuilding the nation's infrastructure in the 1990's and beyond. Economic constraints have limited funds...
Methods for Assessing Wood Structures in Place
The Forest Products Laboratory is developing a comprehensive guideline for assessing the condition of existing wood structures. This paper provides an overview of the current literature...
Sawn Lumber in Bridge Construction
This paper covers many aspects of design and construction that affect the specifications of the sawn wood components of a highway bridge. The relationships between the grading rules for...
Glued Laminated Timber for Bridge Construction
Structural glued laminated timber (glulam) was first introduced into the U.S. as a construction material in 1934. With the development of fully waterproof adhesives in the 1940's,...
Structural Wood Composites in Bridge Construction
Wood composites, known collectively as Structural Composite Lumber (SCL), are a family of wood-based products that better utilize the available wood fiber of a tree. This paper describes...
Premature Failures of Outdoor Masonry Pavements
The authors have investigated and repaired a number of premature inservice failures of masonry paving systems in recent years. These systems have become common, built over underground...
Repair of an Improperly Detailed Masonry Facade: A Case History
The masonry facade of an 18-story condominium building was constructed with an inconsistent pattern of shelf angle supports, marginal lateral restraints and without any horizontal control...
Building Joint Movement
Moisture leakage in masonry claddings occurs not only through copings and facial separation cracks, but also through failed sealant joints in the veneer. The factors affecting joint movement...
Fiber Reinforced Plastic Grids for the Structural Reinforcement of Concrete
The use of fibre resin plastic grid is investigated as a primary bending reinforcement in concrete members. Laboratory bending data is compared with theoretical results using ACI 318-83...
A Prestressed Kevlar/FRP Structural System
The strength/stiffness characteristics of a new lightweight composite structural system have been investigated in this study. The proposed system is constructed of FRP(E-glass/isophthalic...
U.S. Coast Guard Experience with Commercial FRP Vessels with Respect to Structural Reliability
The U.S. Coast Guard currently inspects over 1000 fiber reinforced plastic (FRP) vessels used in commercial passenger service. The designs include monohulls, catamarans, hydrofoils and...
Design of Fiberglass Reinforced Plastic Underground Storage Tanks
The purpose of this paper is to discuss the design and construction techniques of fiberglass composite underground storage tanks. The scope of this paper is limited to the straight shell...
Three Tools for Design Test Bed Analysis
Three analytical tools are outlined for use in design test bed work focusing on the design/production interface. The tools are substitution analysis, coupling analysis, and value chain...
Effect of Fly Ash on the Microstructure and Durability of Concrete
The influence of fly ash on the microstructure and durability of concrete was investigated. It was found that the use of 50% fly ash in concrete reduced greatly its resistance to freezing-and-thawing...
Return to search