Assignment Modeling with Dynamic Traffic Effects
This paper describes the new traffic assignment modeling provided by the Highway analysis component of the TRIPS package. This tackles some fundamental modeling issues regarding the time...
Better Ways to Update Trip Matrices
Updating origin-destination (OD) trip matrices usually involves considerable survey costs, so engineers are often forced to use dated OD information, which can seriously undermine the...
Graphical Representation of Signal and Stop Sign Control Warrants Combined with Level of Service Estimates
An insolated intersection is usually controlled by either signals or stop signs. The choice between these two trafic control devices requires an engineering study which typically examines...
The Wizard of Helpful Intersection Control Hints
The methodology for making traffic control decisions is the subject of this paper. There exists a body of knowledge supporting a sound decision making process, but it requires the use...
Improving the Graphical Interface in Transportation Planning Software
This paper examines the general issues that drive the development of graphics as a medium for transportation planners. Transportation planning has changed over time, and so has the nature,...
Integration of a Traffic Noise Model and AutoCAD
TrafficNoiseCAD represents a new approach to noise analysis and barrier design by integrating file creation for the FHWA STAMINA 2.0 noise prediction program with interactive graphical...
Dynamic Response of Tunnels in Jointed Rocks
We describe the application of the Discrete Element Method (DEM) to the dynamic analysis of the response of tunnels in jointed rocks to earthquake loading. In situations where large motions...
Stress Wave Loading of a Tunnel: A Benchmark Study
Five different finite element or discrete element computer codes were used to solve a sequence of problems leading to the problem of stress-wave loading of a circular tunnel in a jointed...
Modeling Bridge Abutment Stiffness for the Meloland Road Overcrossing
A simplified equivalent spring model representing the dynamic stiffness of a highway bridge abutment system is developed for use in seismic response studies. It is based on linear elastic...
System Identification of the Meloland Overcrossing Using Static and Dynamic Field Data
A system identification study was performed using a computer finite element bridge model and measured static and dynamic response data obtained from full-scale quick-release ram field...
Predicting Turbine-Generator Foundation Vibrations
Two of the major considerations in the design of large turbine-generator foundations are to maintain the proper shaft alignment and to limit the vibration of the machine during operation....
Hybrid Control of Sliding Isolated Structures
The seismic response of buildings and bridges can be improved by isolating the structure with a seismic sliding bearings. Specialized passive devices are commonly used to complement these...
Hybrid Control of Seismic-Excited Bridge Structures Using Variable Dampers
A method of control for seismic-excited buildings or bridge structures using variable dampers is presented. The control method is based on the theory of variable structure system (VSS)...
Parametric Study of Cable-Stayed Bridges Response Due to Traffic-Induced Vibration
The dynamic response of long-span cable-stayed bridges due to moving traffic loads is investigated utilizing three-dimensional models. Modal analysis is conducted using the deformed dead-load...
Linear and Nonlinear Finite Element Analyses of RC Skewed Slab Bridges with Integral Wall Abutments
The design of rigid-frame skewed slab bridges is complicated by higher shears and moments near the obtuse corner (see Fig.1). While the finite element method can be used to compute these...
An Efficient Analysis of Framed-Tube Structures
An efficient model for analysis of framed-tube systems is proposed in this study. The proposed model can represent the interaction between plane frames consisting the tube system. Analysis...
Nonlinear Dynamic Analysis of Single Point Moored Buoy Under Wave and Current Loadings
In this study, a single point moored spherical buoy under wave and current loadings is analyzed in the time domain considering time memory effects. Geometric nonlinearity of the mooring...
Nonlinear Dynamic Analysis of Structural Frames Using Reduced Order Models
In order to provide more realistic and economical design of large structures it is necessary to perform analyses which take into account both material and geometric nonlinearities. Unfortunately,...
A Reduced Order Model for the Seismic Analysis of Building-Soil Systems
A finite element based, reduced order, numerical model has been developed for the nonlinear analysis of building-soil systems. The reduced order system model employs an equivalent continuum...
Three-Dimensional Analysis Model for Complete Masonry Buildings
For the predictive and diagnostic analysis of the complete nonlinear response of masonry buildings to seismic load input, a 3-D finite element model is under development at UCSD. The model,...
Return to search