Large Diameter Plastic Pipe Design
This paper presents a rationale for the design of large diameter plastic pipes for gravity flow applications. This procedure, applicable for all plastic pipes, adapts state-of-the-art...
Successful Use of Centrifugally Cast Glassfiber Reinforced Plastic (GRP) Pressure Pipes for Public Works in Sweden
Centrifugally cast GRP pipes were introduced in Sweden 17 years ago for industrial applications mainly as a gravity pipe. The process of pipe manufacturing as well as the pipe itself and...
Design of Non-Pressure Very Flexible Plastic Pipe
There is considerable debate about the correct structural design procedure to be used for very flexible plastic pipe (VFP) - typically glass-fiber reinforced pipe (GRP), reinforced plastic...
Proportioning Reinforcement for Buried Concrete Pipe
The proportioning of reinforcement between inner and outer cages that is specified in ASTM Standard Specification C76 for concrete pipe in sewer and culvert applications is examined in...
Influence of Frost Action on the Load Exerted on Buried Pipe
When work was started on revising the Swedish code for concrete pipes at the end of the 70's, a research project was carried out to evaluate the risk of increased load due...
Predicting Overland Flow and Infiltration
The kinematic overland flow and the Green-Ampt infiltration equations are coupled and rewritten in terms of several nondimensional parameters. Constant values of these parameters imply...
Aggregation and Consolidation of Phosphatic Clays
The consolidation behavior of aggregated phosphatic clays has been investigated using a bench scale centrifuge. It was determined that aggregation of the clays with phosphogypsum, a waste...
South Branch Rockaway Flood Water Study
The paper reports on a study to analyze in detail various methods of storm water management. The technical studies were carried out in an actual watershed setting to arrive at a recommended...
Integration of Micro, Mini, and Mainframe Computers in WES Hydraulics Studies
The U. S. Army Corps of Engineers Waterways Experiment Station (WESA) Hydraulics Laboratory is involved in hydraulic studies of navigation and flood control projects of the Army Corps...
Application of Water Budget to Seepage Loss Estimation
The seepage loss for the emergency cooling water spray pond has been calculated by performing a water balance study for the pond. A field test of the spray pond was performed to estimate...
Entrainment of Interstitial Water by Overland Flow
The paper reports on a study to investigate the entrainment of interstitial soil water by overland flow. A diffusion model was developed to describe the subsurface concentration and the...
Turbidity Control Measures Associated with Reclamation of an Abandoned Phosphatic Waste Clay Pond
Area 3A in the Tenoroc State Reserve near Lakeland, Florida is an inactive and abandoned phosphatic waste clay area. The disposal area has been inactive for several years and the clays...
A Ground Water Flow Model for Protection of the Northwest Well Field, Dade County, Florida
A new study was initiated to determine the appropriate cone of depression for the Northwest Well Field and to develop land use restrictions within that area. A finite-difference ground...
Field Evaluation of a Diffuser-Induced Mixing Model
Early physical model studies of the diffusers at Browns Ferry Nuclear Plant qualitatively document the mixing characteristics of the thermal effluent. Based on these studies, the dilution...
Integrated Hydrothermodynamic Study of Browns Ferry Nuclear Plant
The results of hydrothermodynamic analyses and computer models discussed in previous papers are combined to present an integrated study supporting a request for alternative thermal limits...
Interactive Computer Aided Graphic Water Well Pumping Test Evaluation Software
A microcomputer software package was developed which allows the user to interactively evaluate pumping tests using semilog and log-log graphic methods for time-drawdown, step-drawdown,...
Ground-Water Drainage to Surface Mines Refined
Changes in seepage flux and hydraulic head (ground-water level) resulting from ground-water drainage into the first and subsequent cuts of a surface coal mine can be estimated by a technique...
A Numerical Model of Water Movement Through Clay Liners
Regulations controlling landfill design typically specify design details such as a minimum liner thickness, maximum permeability of required gradation curves for the clay liner material....
Present Status of Research in Debris Flow Modeling
A viable rheological model should consist of both a time-independent part and a time-dependent part. A generalized viscoplastic fluid model that has both parts as well as two major rheological...
Using Microcomputers for Groundwater Flow Analysis
Micro-computers offer an effective and efficient method for rapid and comprehensive analyses of groundwater flow. There are now numerous codes which have been developed specifically for...
Return to search