Design and Performance of Buried Fiberglass Pipes ? A New Perspective
The buried performance of fiberglass pipes was the subject of a comprehensive and multifaceted research program carried out in 1982 and 1983. Instrumentation, capable of accurately tracing...

Design of Thin Wall Reinforced Concrete Pipe Using Dimension Ratio (DR)
Dimension Ratio is defined as the ratio of the internal pipe diameter to the pipe wall thickness. The Caltrans culvert research leading to the development and use of the Dimension Ratio...

Performance of Low Stiffness Plastic Pipe in Stiff Soils
Large diameter pipe made from ductile plastics, such as polyvinyl chloride (PVC), polypropylene (PP) and high density polyethylene (HDPE) can be effectively utilized in subsurface installations...

Design Criteria for Buried Flexible Pipe
A modified CANDE program was used to analyze a full factorial set of design parameters for buried, large diameter high density polyethylene profile-wall pipe. A new pipe subroutine was...

Importance of Pipe Soil Stiffness Ratio in Plastic Pipe Design
In this paper, the finite element method of analysis is used to study the effect of pipe-soil stiffness ratio on axial forces, bending moments, and deflection of pipes of varying stiffness....

Drip Irrigated Cotton: Economics and Water Savings
Groundwater withdrawals for cotton production in the arid Southwest account for about 15 percent of all groundwater withdrawals. In Arizona, cotton's proportion of groundwater...

Environmental Engineering
The purpose of the Annual Conference on Environmental Engineering is to pursue scientific knowledge and promote sound engineering judgement and practice in the solution of the many environmental...

Finite-Strain Axial Analysis of Piles in Clay
In the late 1970's, a series of research projects developed simple effective-stress methods to predict the axial capacity of piles in normally-consolidated clay. The method...

Centrifugal Modeling of Pile Foundations
Modeling of pile foundations in a centrifuge, where the self weight induced stresses in the soil are simulated by elevated gravity loading, is described. Hollow pipe piles in a stiff clay...

Prediction of Settlement of Single Piles in Clay
Analyses by trial were used to fit theoretical load-settlement curves to measured curves for driven piles. For the elastic method, analyses of load tests indicated that designers should...

Shaft Capacity of Driven Pipe Piles in Clay
A compilation of axial load test records for driven pipe piles in clay published by the American Petroleum Institute is analysed to yield new criteria for skin friction and pile scale...

Limiting Tip and Side Resistance: Fact or Fallacy?
The tip and side resistances of deep foundations do not reach a limit at a critical depth; instead, they increase with depth. For the tip, the rate of increase decreases with depth. For...

Residual Stresses in Piles and the Wave Equation
A data base of 18 vertical load tests on driven piles in sand is presented. On average the residual point load was 56% of the measured point load and the residual friction load 19% of...

Vertical Behavior of Two 16-Year Old Drilled Shafts
Vertical load tests were performed on drilled shafts subject to lateral confining and heaving pressures from expansive soil over 16 years. Results indicated mobilized skin friction equal...

Evaluation of P-Y Relationships in Cohesionless Soils
Four semi-empirical procedures for construction of p-y curves in cohesionless soils were developed to fit data from a particular load test or a specific set of tests on similar soils....

Evaluation of P-Y Relationships in Cohesive Soils
The practice of analyzing laterally loaded driven and bored piles often requires modeling of soil response in terms of uncoupled, non-linear unit load transfer functions. These functions,...

Lateral Load Tests of Piles in Sloping Rock Fill
A new container wharf constructed at the Port of Los Angeles features vertical prestressed concrete piles to provide both vertical and lateral support. A rockfill embankment used to allow...

A Flat-Dilatometer Study of Lateral Soil Response
The effect of flat dilatometer penetration on the lateral stress conditions in soil around the dilatometer blade and the soil response against dilatometer diaphragm deflection were investigated...

Dynamic Stiffness of Pile Groups
A number of procedures have been proposed for the dynamic analysis of complete pile foundations including group effects. Most of these introduce some sort of approximation to reduce the...

Winkler Soil Model for Axial Response Analysis of Pile Groups
In this approach, the soil is idealized as a nonlinear Winkler model for a pile group attached to a group of piles. The model can account for pile-soil-pile interaction. Pile group responses...

 

 

 

 

Return to search