Preventing Stilling Basin Abrasion
A 1:10 scale physical hydraulic model of Taylor Draw Dam outlet works was used to develop modifications to prevent back flow intake of rock into the stilling basin. Much of the back flow...
Experimental Model Study of Over and Under Baffles
A hydraulic model study of a chlorine mixing channel was conducted at the Hydraulic Research Laboratory of the City of Los Angeles. An arrangement of over-under baffles was used to facilitate...
Classification and Prediction of Buoyant Surface Discharges
Past efforts to predict the dilution and geometric characteristics of buoyant surface flows have relied on integral modelling techniques involving the solution of a series of differential...
A New Approach to Local Scour Depth Estimation Under a Horizontal Jet or Free Water Fall
A new formula is presented to estimate the local scour depth development with time due to a horizontal jet or free water fall based on a new approach which combines the concept of energy...
Fluid Mud Problems in Lakes, Reservoirs and Detention Ponds
An experimental study of wind induced surfacing of fluid mud bottoms in shallow water has been conducted. The experiments involved a channel placed within a wind tunnel, where a two-layered,...
Designing Better Hollow Fibre Contactors
In this paper we calculate optimum hollow fibre module designs for gas absorption by maximizing the mass transferred per unit cost. Two costs are considered; the membrane cost and the...
Problems with Rock Excavation Specification in Alberta
As a result of contract overruns and claims from classification, measurement, and payment for 'solid rock' excavation, Alberta Transportation and Utilities embarked...
Where Does Rock Begin Beneath Philadelphia?
Philadelphia provides an excellent example of the engineering problems associated with the interpretation of saprolite/weathered rock/sound rock profiles. The bedrock beneath the city...
The U.S. Office of Surface Mining (OSM) Proposed Strength-Durability Classification System
Federal regulations for the surface mining of coal stress proper design and construction of stable waste rock disposal areas. A key to the long-term stability of these excess spoil fills...
Mechanics Computing in 1990's and Beyond
This proceedings,
Continuum Modelling of Traffic Dymamics
Two new efficient higher-order continuum models are proposed to improve modelling of traffic dynamics. The new models do not require the use of an equilibrium speed-density relationship,...
Modified Asphalt Binders for Military Airfield Pavements
This report documents a laboratory-based research effort to determine the effects of asphalt modifiers and alternate binders on asphalt airfield pavements. The modified binders were tested...
Reliability-Based Design of Tunnel Support in Jointed Rock
The presence of joints in a rock mass may cause local instability of the tunnel support and its effect on safety should be included in design. Because of significant uncertainties in the...
Bayesian Updating of Axial Capacity of Single Pile
The paper outlines a Bayesian technique to update predictions of pile driving and axial pile capacity on the basis of pile driving records. The approach enables one to systematically account...
Near-Field Differential Ground Displacement
An analytical model for the development of differential ground motions in the vicinity of a vertical, strike-slip fault is presented. The model considers a uniform, kinematic source model,...
Large Monte Carlo Simulation of Duffing Equation
This effort aims to obtain some accurate statistics of the Duffing Equation subjected to white noise through Monte Carlo simulation. The results obtained can be used to check the accuracy...
Ambiguities and Inanations of Current Plastic Pipe Specifications
This paper discusses current specifications, including materials for plastic pipe as compared to other pipe specifications, including rigid pipe materials. It discusses the ambiguities...
Short-Term Versus Long-Term Pipe Ring Stiffness in the Design of Buried Plastic Sewer Pipes
It is often discussed which pipe ring stiffness should be used when designing the long-term deflection of buried plastic sewer pipes; the short-term value or the long-term value? As the...
Stress Relaxation Characteristics of the HDPE Pipe-Soil System
All piping materials and soils are subject to viscoelastic behavior such as stress relaxation and creep. The combination of soil and pipe viscoelastic properties determine the time-dependent...
Geometrical Nonlinearity in Offshore Pipelines
Pipelines are very flexible structural systems which are subjected to various boundary conditions. For instance, during the laying process, the pipes roll on the guidance tracks on the...
Return to search