Hydraulic Model Studies of Y-Branch
Hydraulic model studies were made for the Y-branch steel penstock located in a vertical bend. The model tests were performed for various modes of pumping and generating operation. The...
Bridge-Scour Analysis Using the
A program was developed to extract hydraulic information required for bridge-scour computations, from the Water-Surface Profile computation model (WSPRO). The program is written in compiled...
Debris Flow Initiation and Termination in a Gully
A comprehensive simulation model predicting the debris-flow discharge hydrograph, solids concentration in it and the process of variation of the channel due to vertical as well as lateral...
An Empirical Model for the Volume-Change Behavior of Debris Flows
The potential travel down hillsides; movement stops where the volume-change behavior of flows as they travel down hillsides ; movement stops where the volume of actively flowing debris...
The Concept of Local Euler Number as an Aid for Sizing Pitot Tubes
Correlations with drag coefficients enable determining the relations between the form of Pitot tubes and their velocity coefficients. A numerical example is presented to clear the use...
Three-Dimensional Free Surface Modeling (Is There a Best Approach?)
With the increases in computing power, researchers all over the world are developing and applying three-dimensional (3D) hydrodynamic models. The numerical techniques employed are usually...
Three-Dimensional Variable Resolution Hydrodynamic and Transport Modeling of the Chesapeake Bay System
This paper describes a domain decomposition methodology used in the application of the three-dimensional environmental fluid dynamics code, EFDC, to model hydrodynamics and transport in...
2-D Vertical and 3-D Modelling of Mud Transport in Tidal Flows
Model predictions of a fully three-dimensional sediment transport model are presented for two tidal flow variation cases. A simplified two-dimensional form of the model is applied to demonstrate...
Shifts in Solute Transport Direction Induced by Transient Flow
Traditionally, solute transport projections have focussed on the long-term, steady state conditions expected to prevail in a groundwater system. However, transient effects may often dominate...
Structure of Coastal Upwelling on a Sloping Bottom
A large eddy simulation of coastal upwelling on a sloping bottom is carried out. The structure of the upwelling consists of a persistent primary front, a temporary secondary front which...
A Culvert Analysis Program for Indirect Measurement of Discharge
A program based on the U.S. Geological Survey (USGS) methods for indirectly computing peak discharges through culverts allows users to employ input data formats used by the water surface...
Flow Diversion in a Steep, Coarse-Bed Stream
A case study is presented of the hydraulic design of a diversion structure in a high velocity, coarse bed streamcourse. Mill Creek, a tributary to the Upper Jordan River in the southern...
Serviceability Stress Limits for Composite Beams
Serviceability limits are increasingly becoming the critical design requirement for composite beams. A set of three illustrative design studies indicates that this is particularly true...
Pipeline Leak Detection Based on Mass Balance
Current technologies in Supervisory Control and Data Acquisition (SCADA) systems enable pipeline leak detection to be carried out in real time by software-based methods. This paper discusses...
SHRP Deformation Test?Asphalt Mix Tests and Analysis Systems
From analyses of existing information on the permanent-deformation characteristics of asphalt/binder-aggregate mixes, as well as the development of permanent deformation in pavement structures,...
Radiographic Visualization in Experimental Soil Mechanics
A summary of the principles of such methods is presented, i.e. stereophotogrammetry, infrared thermography and radiography and their respective ranges of applicability are discussed. Then,...
Digital Image Techniques for Volume Change Measurements in Triaxial Tests
This paper presents an innovative technique that has been used for measuring the volumetric deformation that cylindrical specimens experience during the shearing stages of a triaxial test....
Displacements in the Soil Near a Tunnel Face Using Centrifuge Tests and Image Processing
Image processing is applied to measurements of the soil for a tunnel model in centrifuge. For this aim a specifical device has been developed on the LCPC centrifuge (Nantes, France) and...
Heavy Aircraft Damage to Rigid Airport Pavements
A theoretical solution is presented for the damage caused by heavy aircraft at the transverse joints in a rigid airport pavement. Large stresses in the subgrade generate significant permanent...
Use of Surface Treatments on Airport Pavements
Asphalt is generally used as the surfacing for flexible airport pavements with airline passenger jet aircraft. In Australia and its neighbouring territories, surface treatments (seals)...
Return to search