ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Effects of Land Subsidence on Flood Profiles
In this study, the effects of land subsidence on water-surface elevation and depth profiles during flood conditions were investigated for a large, hypothetical, slope-controlled stream....

Comparison of Some River Discharge Calculation Methods
To measure the discharge of a river, it is necessary to develop a stage-discharge curve based on water velocity at various cross sections of the river. This is the method which is used...

Modification of Meander Pattern Using Wing Dams
A sharp river bend and a highway bridge together create potentially hazardous conditions for all down-bound barge tows on the Mississippi River at Lansing, Iowa. The tendency of the river...

Lessons from the Failure of a Needle Valve
In 1984 a manually operated, hydraulically actuated 66-inch needle valve ruptured due to water hammer. The circumstances that caused the failure were reconstructed through extensive analysis...

Choices Between Micro and Mainframe Computers
The explosion of microcomputers (PCs) has shifted a great amount of engineering computing from mainframes to micros. It has also shifted a lot of programming from FORTRAN to BASIC. This...

The Use of Spread Sheets in Water Resources Planning
With the advent of 'spread sheets' in the microcomputer explosion, a tool is available for the first time to greatly simplify many engineering procedures. This...

Models of Border Irrigation for Flat Clayey Soils
Border irrigation is widely used for irrigating pastures in south-east Australia. Inadequate earthworks, design and operation of irrigation layouts have been major causes of waterlogging...

The Relationship of Benefits to System Size for Irrigation Projects
This paper presents a generalized linear programming (LP) and farm budget model for optimization of on-farm irrigation benefits resulting from variations in irrigation project size. The...

Considerations for Sizing Water Delivery Systems
The purpose of a water delivery system is to deliver irrigation water to a farm and its design should be based on meeting the requirements of farm water use. The rate, duration and frequency...

Irrigation District Management?Past, Present and Future
This paper reviews the significant changes in the policies and procedures followed by agencies formed to deliver irrigation water in the western United States generally and California...

Crop-Water Production Functions and System Design
A Task Committee to evaluate application of crop-water production functions to irrigation system design and management was established by the ASCE Irrigation Water Requirements Committee...

Economic Analysis Tools for Differential Inflation
Economic decisions based on a life-cycle analysis should consider differential increases or decreases in operation and replacement costs and benefits over the project or component life....

An Integrated Rehabilitation Procedure for Gravity Systems
Demands for an improved system combined with a more adjusted management mode are common in many projects where limited or strained budgets do not allow for a regular and secure water supply....

Forty Years of Computational Hydraulics?1960-2000
The definition of computational hydraulics as used herein is: the application of numerical methods for the solution of problems of hydraulic flows, largely as practiced by the civil engineering...

Coastal Zone '87
Coastal Zone '87 is the fifth in a series of multidisciplinary meetings on comprehensive coastal and ocean management. The papers included in this publication review technical...

Liberty Restored
The Outstanding Civil Engineering Achievement of 1987 is the restoration of the Statue of Liberty in New York Harbor. The restoration work included many engineering tasks that by themselves...

Calibration of a Bridge Rating Formula for Overload Permits
This paper proposes a method to calibrate a reliability based load and resistance factor design (LRFD) permit evaluation formulation that will account for the overloaded truck's...

Multiple Presence Reduction Factors for Bridges
This paper reviews the multiple presence reduction factors specified in the AASHTO and Ontario codes, and provides a method by which these factors can be established in relation to volume...

Queensboro Bridge Inspection and Rehabilitation
An in-depth inspection of the Queensboro Bridge revealed deterioration of certain elements on the lower level of the main bridge. These elements include the outer roadway cantilever brackets,...

Design of Steel Transmission Pole Structures
This document has been carefully prepared in an effort to provide an authoritative source of information about effective design and fabrication of steel transmission pole structures. The...

 

 

 

 

Return to search