Boundary Integral Methods for Unsaturated Flow
A boundary integral equation method (BIEM) is described for numerical analysis of quasilinear steady unsaturated flow in homogeneous material. The applicability of the exponential model...
Effect of a Low-Permeability Layer on Calculated Gas Flow at Yucca Mountain
Yucca Mountain is being studied to determine its suitability as a location for a high-level nuclear waste repository. The mountain is a steep-sided linear ridge which is underlain by a...
Research Program to Develop and Validate Conceptual Models for Flow and Transport Through Unsaturated, Fractured Rock
As part of the Yucca Mountain Project, our research program to develop and validate conceptual models for flow and transport through unsaturated fractured rock integrates fundamental physical...
The Adoption of Mechanized Excavation Techniques for the Superconducting Super Collider
The Superconducting Super Collider (SSC) is the latest and largest in a line of high-energy physics accelerator projects. The five increasingly energetic accelerators which make up the...
Principles of the NATM and Other Uses of the Geologic Monitoring Techniques
The NATM (New Austrian Tunneling Method) differs in several respects from other construction methods. Also referred to as the 'sequential support method' or the...
Risk Assessments for the Design of Subsurface Openings
A probabilistic approach was introduced to assess the risk of structural instability due to rock joint systems in rock mass, where subsurface openings are excavated, such openings as shafts,...
The Integrated Performance Assessment in SKI Project-90
The SKI Project-90 is a performance assessment of a hypothetical repository system with KBS-3 features in crystalline rock. A large part of the effort has been to identify and characterize...
GA-4/GA-9 Honeycomb Impact Limiter Tests and Analytical Model
General Atomics (GA) has a test program underway to obtain data on the behavior of a honeycomb impact limiter. The program includes testing of small samples to obtain basic information,...
Comparison of Elastic and Inelastic Analysis and Test Results for the Defense High Level Waste Shipping Cask
In the early 1980's, the U.S. Department of Energy/Defense Programs (DOE/DP) initiated a project to develop a safe and efficient transportation system for defense high level...
Modelling of Excavation, Thermal Loading and Bentonite Swelling Pressure for a Waste Repository
For the performance assessment of a future nuclear waste repository, the excavation of the tunnel and deposition hole, thermal loading from waste heat release and the swelling pressure...
Estimating Geochemical Behavior of Cocnretes to be Placed at Yucca Mountain
The interactions of J-13 water with cementitious materials were examined at 25?C using the geochemical code EQ3NR/EQ6. Results of the modeling suggested the following conclusions: (1)...
Scenario Evolution: Interaction Between Event Tree Construction and Numerical Analyses
Construction of well-posed scenarios for the range of conditions possible at any proposed repository site is a critical first step to assessing total system performance. Event tree construction...
A Formalism to Generate Probability Distributions for Performance-Assessment Modeling
A formalism is presented for generating probability distributions of parameters used in performance-assessment modeling. The formalism is used when data are either sparse or nonexistent....
Three-Dimensional Thermal Analysis for Temperature Distribution in Geological Formation
A three-dimensional conduction heat transfer program has been developed for use on microcomputer for thermal analysis of a conductive medium subject to, finite length heat sources. The...
System Analysis Dual-Purpose Repository New Results of Temperature Calculations
As design concept for a high-level waste (HLW) final repository the emplacement of reprocessing wastes and spent fuel elements of different types in a common repository is being studied...
Interim Storage of Solidified High Level Wastes
Indian approach to the problem of interim storage of vitrified high level wastes, indicating design philosophy adopted for air cooled vault at Tarapur has been described. Important design...
Interim Waste Storage for the Integral Fast Reactor Fuel Cycle Demonstration
An interim storage system design and operating strategy were developed for implementation in the Integral Fast Reactor Fuel Cycle Demonstration. Waste characteristics and thermal power...
Uncertainty Analysis of Preclosure Accident Doses for the Yucca Mountain Repository
This study presents a generic methodology that can be used to evaluate the uncertainty in the calculated accidental offsite doses at the Yucca Mountain repository during the preclosure...
A Decision Support System for Performance-Based Site Characterization
The complex and dynamic requirements of site characterization present a major management challenge. ParaTrac, a regulatory and technical information system, is described as a valuable...
Development of a Pavement Design Expert System
The latest edition of the Guide for Design of Pavement Structures was published by the American Association of State Highway and Transportation Officials in 1986. This edition of the Guide...
Return to search