Design of Fiberglass Reinforced Plastic Underground Storage Tanks
The purpose of this paper is to discuss the design and construction techniques of fiberglass composite underground storage tanks. The scope of this paper is limited to the straight shell...
Three Tools for Design Test Bed Analysis
Three analytical tools are outlined for use in design test bed work focusing on the design/production interface. The tools are substitution analysis, coupling analysis, and value chain...
Effect of Fly Ash on the Microstructure and Durability of Concrete
The influence of fly ash on the microstructure and durability of concrete was investigated. It was found that the use of 50% fly ash in concrete reduced greatly its resistance to freezing-and-thawing...
Permeability Effects on the Sulfate Resistance of Concrete
A laboratory study was conducted to determine the effect of permeability on the sulfate resistance of concrete containing fly ash. Concrete specimens were moist cured for 7 and 100 days...
Experimental Mixes to Minimize Rutting
This report describes the materials and construction details involved in the design and placement of four experimental mixes on I-95 (Richmond-Petersburg Turnpike) in 1985 and follows...
Composite Applications in Highway Bridges
This report presents a summary of a four year research effort titled, 'Transfer of Composite Technology to Design and Construction of Bridges'. Extensive analytical...
Environmental Considerations in the Design of Asphalt Concrete Paving Mixtures
The design of asphalt concrete mixtures is largely based on two empirical mixture design methods. These are 'Marshall' and 'Hveem',...
AE Instrumentation and Deconvolution Techniques
This paper describes the difficulties and solutions achieved in applying advanced Acoustic Emission (AE) signal analysis techniques to fracture mechanics. The test specimen is a double...
Displacement Measurement by Laser Interferometry and Image Analysis
Laser holographic interferometry was used for the evaluation of displacement fields on concrete and fiber reinforced concrete specimens. Transmission holography was used to analyze mortar...
Application of Waterjet Cutting for Pothole Repair
A study was conducted to determine the feasibility of utilizing high pressure waterjet cutting technology as an infrastructure maintenance tool. The influence of waterjet cutting parameters,...
Accurate Computation of Freezing Index
'Freezing index' (cumulative degree-days below freezing) is used for predicting frost penetration depths and modelling pavement performance. Contour maps which illustrate geographic trends...
Behavior and Strength of Telescopic Steel Shores
To study the load distribution between concrete floors and shores during construction, the non-linear axial load-shortening behavior of a single post shore must be modeled properly. In...
Stresses in Concrete Armor Units
This book is derived from a Seminar at the Waterways Experiment Station, Coastal Engineering Research Center, Vicksburg, Mississippi held on November 7-8, 1989. It presents a state-of-the-art...
Selected Earthquake Engineering Papers of George W. Housner
Sponsored by the Structural Division of ASCE. This volume collects key papers on earthquake engineering by George W. Housner, who more than any other...
Design and Performance of Earth Retaining Structures
The proceedings of the 1990 Specialty Conference on Design and Performance of Earth Retaining Structures was held in Ithaca, New York from June 18-21, 1990. It presents a total of 50 papers...
Untangling A Can of Worms
Increasing traffic volumes combined with rush-hour delays and commuter complaints have spurred New York State DOT to improve the capacity of a major interchange near Rochester. The interchange,...
The Fine Print
An engineer who uses software, or supervises those who do, must know the laws regulating its purchase and use. Whether a company contracts for custom software, or leases, licenses or contracts...
Commuting Computing
Portable computers come in many different shapes and sizes and boast many of the same features as desktop machines. Unlike desktop PCs, however, the key to getting the most use out of...
Project Management: Now On-Line
Only 20 years ago, computerized project management was available only to large firms with mainframe computers. Even four or five years back, well into the personal-computer revolution,...
Gateways to Understanding
Automating engineering design processes are crucial to the growth and the very survival of professional services providers. The need to enhance their competitiveness and the value provided...
Return to search