Conjunctive Use of Surface and Groundwater
A computer model was developed by T. Sammis and Z. Samani to simulate the conjunctive use of surface and groundwater. The model consisted of a groundwater simulation subroutine and a crop...
Canal Automation for Flexibility on Sloping Canals
This project and tested a method which would allow flexible water deliveries from medium-large canals. The canal gate movement algorithm CARDD (Canal Automation for Rapid Demand Deliveries)...
A Modern Approach to the Design of Grassed Channels
The design of grassed channels can be based on modern fluid mechanics principles. The resistance to flow in a grassed channel is linked directly to the relative roughness of the flow through...
Evaluating Groundwater Pollution Potential Using Geographical Information Systems
A procedure for developing groundwater pollution potential maps using a geographical information system (GIS) is introduced. The concept of pollution potential mapping is discussed, along...
Effect of Water Depth and Groundwater Table on Infiltration from Recharge Basins
The actual effect of water depth on infiltration depends on the depth to groundwater and on whether the wetted perimeter of the basin is clean or covered by a clogging layer of fine particles...
An Evaluation of the Large Mammal Entry/Escape Steps Coachella Canal In-Place Lining Project
This study evaluated the effectiveness of a new system of large mammal entry/escape steps as part of the environmental investigations for the Coachella Canal In-place Lining Prototype,...
Near Real Time Irrigation Scheduling Using Heat Unit Based Crop Coefficients
An interactive computer program (SCHEDPEN) which utilizes growing-degree-day based crop coefficients for irrigation scheduling was developed and tested on cotton during 1988 and 1989 at...
Design of Steel Transmission Pole Structures
Comparison of Design Rainfall Criteria for the Southwest
The design of drainage and flood control facilities or the management of floodplains for alluvial fans is extremely sensitive to the design rainfall criteria that is used as input to the...
Inclusion of Wetlands in Designated Floodway Studies
The purpose of this paper is to propose a change in the traditional methods and procedures used by hydrologist and hydraulic engineers to define floodways and floodway fringe areas. We...
Multi-Date Image Analyses Used for Determining Flood Area Impacts in the Saginaw River Basin, Michigan
During the months of September and October 1986, a series of storms swept across the Lower Peninsula of Michigan. These heavy downpours caused $400 million worth of flood damages. Significant...
Predicting Stream Width and Bank Retreat
The width of streams is dependent on the flood flow discharge which varies from year to year, the bank material which varies from stream to stream and reach to reach, the sediment load...
Hydraulic Bridge Design for Movable Bed Conditions
This paper addresses the practical considerations of hydraulic design of a bridge under movable bed conditions. Hydraulic design tasks include pier and abutment scour calculations, design...
Alignment of Large Flood-Peaks on Arid Watersheds
Bridge and culvert design requires estimates for 25- to 100-year return period flood peaks (Q). Floodplain delineation calls for 500-year (Q500) estimates. Arid western flood series are...
Rainfall-Sampling Impacts on Runoff
The sensitivity of computed peak-runoff rates to rainfall-sampling frequency over three semiarid watersheds in southeastern Arizona of increasing size is investigated using the methodology...
Runoff and Erosional Processes in an Arid Watershed
This paper reports the results of geomorphic, hydrologic, and hydraulic analyses that integrated a physical process computer model of rainfall/runoff processes with a geomorphic process/response...
Resistance Consisting of Both Viscous Force and Dispersive Force
A set of specially designed experiments have been carried for studying the resistance of a flow consisting of water and both fine and coarse particles. The viscous force caused by fine...
Graphics Advances Aid Flood Engineers
In the last decade options have been suggested to the Log-Pearson III (LP3) computation for predicting design flood behavior in semi-arid conditions. Observations from an ongoing study...
The Sorry State of Flood Hydrology in the Arid Southwest
Flood hydrology for urban areas of the arid and semiarid Southwest is in a sorry state. It is based in large part on precomputer manual methods. The state-of-the-art should move into the...
Design Storms and Sizing of Flood Control Facilities
Design stroms which embody the rainfall characteristics of an area are used for the sizing of drainage facilities. The selection of a design strom may significantly influence the design...
Return to search