Role of Air in Improving First-Stage RBC Performance
A four-stage RBC (rotating biological contactor) treatment plant having two parallel trains is used to treat combined municipal and industrial dairy waste from a city with a population...
A Modified RBC Design: Performance Evaluation
An RBC (rotating biological contactor) system was designed using Pall rings type 40, and tested under high organic surface conditions. Influent soluble BOD averaged at 55 mg/l, equivalent...
Fluidization of Biomas Covered Sand Particles
The expansion behavior of the fluidized bed reactor support medium is important in its design and analysis. Steady state and dynamic behavior of fluidized bed expansion were compared with...
Modular Plastic Media for Shallow Bed Trickling Filter Applications
Little specific data is available for less sophisticated trickling filter systems which employ recent plastic media designs for shallow bed filters without the added cost of subsequent...
The Use of Activated Carbon as a Polishing Step for Treatment of Industrial Plating Wastewaters
An activated carbon adsorption process was utilized as a polishing step following the precipitation (hydroxide or sulfide) process. Zinc and cadmium were the metals studied. Since plating...
Factors Influencing Zinc Cementation of Cadmium
The research reported here examines an innovative procedure for removal of cadmium from wastewaters. This process is the cementation of cadmium by zinc metal. Cementation is highly attractive...
The Adsorption Characteristics of NI (II) Onto Bubble Surface
The removal of Ni(II) by foam fractionation is brought about by the electrostatic mechanism. From removal and zeta potential measurements, it clearly demonstrates that Ni**2** plus and...
Fixation of Chromium and Cadmium from Electroplating Waste Sludges
The authors compare the effectiveness of two fixation techniques, namely silicate-cement and lime-fly ash, for immobilizing chromium and cadmium in a waste sludge obtained from an electroplating...
Direct Filtration of High Turbidity Water Using Contact Flocculation
It is shown that the system of bed contact flocculation followed by standard dual media filters provides a viable alternative to both conventional as well as direct filtration, particularly...
Treatment Plant Comparisons in Removing Molecular Weight Fractions of THM Precursors
This paper describes the performance of several types of water treatment plants in removing various molecular weight fractions of natural occurring aquatic organic matter, some of which...
Direct Filtration of Colored Water Supplies
The effects of raw water quality, chemical treatment, and filtration variables on the performance of direct filtration are examined. Cationic polyelectrolytes as sole coagulants are effective...
Optimization of Design and Operating Parameters for Single-Media, Unstratified-Bed Filters
The potentially successful use of filters containing large grain-size single media for water filtration has prompted investigation of the parameters controlling the performance of these...
Computer Simulation of Lime-Soda Softening of Cooling Waters
A computer model is developed to simulate the process of lime-soda softening of cooling waters. Results from the model are compared with those from a laboratory experimental study using...
Development of a Simplified Nitrogen Mass Balance Model in a Macroalgae Dominated System
A seasonably variable nitrogen uptake rate has been established for Ulva in Mumford Cove, Conn. This rate has been verified using three separate water quality analyses each of which assume...
In-Plant Testing for Evaluating Aeration Systems
In the fall of 1984, ASCE published a standard, Measurements of Oxygen Transfer in Clean Water. The standard, if used by the industry, should simplify evaluation of alternative aeration...
A New Approach to Activated Sludge Plant Design
Activated sludge plants are designed on the basis of stationary tests at laboratory scale for constant organic loads and constant input flows. From these tests the kinetic parameters are...
Measurement of Activated Sludge Rheology
Rheological measurements provide fundamental information on the physical properties of activated sludge. Such properties influence the behavior of activated sludge in wastewater and sludge...
Understanding Secondary Clarifier Behavior
The author has developed a graphic procedure for analyzing the hydraulic behavior of settling tanks. Data have been used in numerous cases to devise low cost in-tank and external improvements...
Impoundment Design for Precious Metal Tailings
An engineering study and design of impoundments for the disposal of mill tailings in central Nevada is presented. Mill process waste is generated as flotation tailings and cyanide residue....
Field Scale Solidification/Stabilization of Hazardous Wastes
The selection of appropriate remedial action measures only takes place after a full evaluation of all feasible alternatives. An alternative to off site disposal is solidification/stabilization...
Return to search