Rehabbing Historic Buildings
Historic buildings often require structural upgrading before the cosmetics of restoration can be applied. Two case studies are presented here. The Four Seasons Hotel in Seattle required...
Earth Reinforced Dams: First in U.S.
Earth reinforcement has in recent years been applied in the restoration and construction of dams. Earth reinforcement has been used to raise dam heights, replace traditional earth embankments...
Nondestructive Testing Cuts Runway Rehab Costs
Nondestructive testing of an asphalt overlay of a crosswind runway at Kansas City International Airport not only reduced construction costs and runway downtime, but proved that only the...
Record Concrete Box Girder Spans Houston Ship Channel
The Houston Ship Channel Bridge is an American advancement of the cast in place, post-tensioned, segmentally constructed, concrete box girder design. In spite of the complex and unique...
Dirt and Steam
Mechanization came late to the construction industry, and it was not until the middle of the nineteenth century that power earth moving machinery began to be used. Steam powered floating...
Pier Stabilization Eliminates Need to Reconstruct Damaged Bridge
After an ice jam near a six-span bridge restricted normal water passage, the ensueing high velocity water caused underscouring of one of the piers, leaving it ineffective as a bridge support....
Overview: Introduction to Cold Region Construction
Speaking of cold region construction, it is natural to think only of the arctic, however, this is completely erroneous. Throughout North America there are various types of cold region...
Preparation of Equipment for Cold Regions
An overview of equipment required to support arctic construction is presented. Special features which have been incorporated into standard equipment designs are explained. Also presented...
Ice and Snow Utilization in Cold Regions Construction
An overview of requirements is presented for the planning, design, and construction of roads, pads, and airfields using water, ice and snow as construction materials. Practical guidelines...
Cold Regions Earthwork
The purpose of this paper is to outline the state-of-the-practice in cold regions earthwork based on experience gained in the Prudhoe Bay area of Alaska. Material properties of fill used...
Cold Regions Concreting
The quest for energy and other riches of the earth in the north regions, the establishment of permanent scientific and defense stations in cold regions, the high cost of project and construction...
Quality Assurance for Cold Regions Construction
Quality Assurance for cold regions construction begins at the design stage. Unique civil, structural, material and equipment requirements for the severe arctic environment and continuous/discontinuous...
Cold Regions Safety
Presented here are some essential basics for the development of a comprehensive cold regions safety program. The intent is to cover a few topics in some detail, and to increase the general...
Flanged Reinforced Concrete Flexural Members
Design aids in the forms of charts and tables are available for design of reinforced concrete flexural members. Many of these design aids were developed for design of rectangular cross...
Field Experience: Another Facet of Professional Development
Since young engineers rarely get the chance to get into the field and observe construction on site, either because of their firm's policy of not letting inexperienced people...
Current Practice in Cost Estimating and Cost Control
This proceedings,
Cold Regions Construction
A State of the Practice Report
An overview of cold region construction and state of the practice reviews of various aspects of this engineering specialty are presented. The overview covres the development of cold region...
Pipelines in Adverse Environments II
State of the art and future trends in pipeline design, construction and maintenance are reviewed. Specific areas addressed include adverse terrain conditions, river crossings-particularly...
Structural Lumber: An Overview of Research Needs
Structural performance of lumber is influenced by the processing steps from forest to final end-use and by the end-use environment. Research needs in processing include: 1) selection of...
Mechanical Fastening of Structural Wood Members?Design and Research Status
A brief overview is provided of the current mechanical fastening research base as background for a discussion of future research needs and priorities. A summary is presented of the current...
Return to search