Stabilized Fly Ash Cover for a Municipal Waste Landfill
The study reported herein and several recently related projects have been aimed at reducing the hydraulic conductivity of fly ash and physiochemically fixing any potential leachable metals....
The Changing Legal Structure of Non-Utility Generation in the 1990's
Before actual construction of a small power production or cogeneration facility commences, numerous economic, technical and legal factors have been considered during the planning process....
Facing the 21st Century with an Aging Hydro System
The Tennesse Valley Authority (TVA) has implemented a comprehensive study of their hydroelectric plants in order to extend their service life for the next 50 years into the 21st century....
Dam, Spillway and Hydropower Rehabilitation
Many older dams are in need of rehabilitation as a result of aging, deterioration, and more stringent safety standards. Current deficiencies include deterioration of original construction...
Hydro Rehabilitation?Innovative Solutions
Most hydro facilities have been in operation for many years and, consequently, must periodically have been rehabilitated. The high cost of energy, labor, materials, and financing dictate...
Brule Project Spillway Rehabilitation and Expansion
Brule Hydroelectric Project is located near Florence, Wisconsin, on the Brule River about 1.5 miles upstream of its confluence with the Michigamme River. The 80 year old dam developes...
Automation of Union Electric's Hydro-Power Plants
Union Electric Company is spending twelve million dollars on Electronic Control and Monitoring equipment at two of their hydro-electric plants (a total of twenty-seven generating units)...
Fly Ash in Roller Compacted Concrete Pavement
This paper presents the state of practice on the use of fly ash in roller compacted concrete (RCC) pavements. Placed using asphalt pavers and compacted using asphalt rollers, RCC pavement...
Superplasticized High-Volume Fly Ash Structural Concrete
This research was carried out to develop structural grade concrete containing high-volumes of ASTM Class C fly ash. A Portland cement concrete, proportioned to have 28-day compressive...
Low-Rise Shear Wall Failure Modes
A summary of the data that are available concerning the structural response of low-rise shear walls is presented. These data will be used to address two failure modes associated with shear...
Advanced Composites Materials in Civil Engineering Structures
This proceedings of the Specialty Conference on Advanced Composites Materials in Civil Engineering held in Las Vegas on January 31?February 1, 1991 contains 40 papers from ten technical...
Vine Street Reborn
Following decades of controversy and a four-year construction effort that threatened to drive both engineers and local motorists crazy, Philadelphia's Vine Street reopened...
A Computerized Completion
The original designers of the 1.6 million sq ft Fillmore Center in San Francisco (its largest mixed-use development project in 20 years) had specified a large amount of steel reinforcement...
Making the New Look Old
Between March 1990 and January 1991, Annapolis buried overhead utilities and reconstructed the roadway around the historic State House, built in 1769. The paving stones, colonial-appearing...
Jailhouse Design
According to statistics from national corrections groups, the inmate population in the U.S. has reached 1 million and could double by 1995. With the constant need for more beds, engineers...
Approximate Methods of Structural Analysis: Principles and Pitfalls
In this modern age when the trend in structural engineering and structural engineering education is to make more and more use of computers and standard structural analysis programs, there...
Structural Approximations in Multi-Story Buildings
Simplified computer analyses and various approximate hand calculation methods are extremely valuable in structural engineering for multi-story buildings both during the preliminary design...
Wind Frame Design for Mid Rise Buildings
A brief discussion of drift limits is followed by design procedures for unbraced moment resisting wind frames and initial selection of optimized member sizes for chevron bracing frames....
Simplified Second-Order Inelastic Analysis for Steel Frame Design
Several current approaches are outlined that account for the spreading of plasticity in a second-order inelastic analysis of frames. The approaches are based on modifications to the simple...
The Boundary Element Method in Engineering Practice
The boundary element method (BEM) provides an excellent basis for the development of integrated design and analysis systems. The technique possesses the advantages of simple model generation,...
Return to search