Reliability of Cracked, Prestressed Girders
For prestressed concrete structures in non-aggressive environments or where corrosion-protected prestressing strands are used, it may be possible to allow flexural cracking into the precompressed...
Rehabilitation of Highway Bridges: Design and Operational Considerations
The design of a rehabilitation of a bridge which must maintain some lanes of traffic requires special consideration of construction procedures and traffic control, which are discussed...
Reliability Analysis of Single-Headed Anchor Bolts
Several design equations for predicting the capacity of single-headed anchor bolts embedded in plain concrete have been recommended in the United States. The capacities predicted by these...
Applying the Time-Reliability Equation
This paper presents a methodology for rigorously including time-varying elements of reliability through the use of the time-reliability equation. An example reliability analysis which...
Stochastic Risk Assessment for Structural Safety
Through the United States the structural safety of major and/or innovative structures has become a serious concern for engineers and to the general public. The objective of this paper...
An Intelligent Design Support System for Computer-Aided Site Development
This research proposes an intelligent design support system (DSS) integrated with a CAD environment for building site planning and development. The DSS is used for providing a good initial...
Lessons to be Learned from Lafayette Tennessee's Small Diameter Sewer System
Lafayette, Tennessee's septic tank effluent, small diameter gravity sewer (SDGS) system is believed to have been the first such project to be funded by the United States Environmental...
Vacuum Sewers: Construction and Operating Experience
As an alternative to conventional collection, the vacuum system has many advantages. Smaller diameter pipes, shallower trenches and the ability to make vertical and horizontal field changes...
Alternating Direction Oxidation Ditches?A Cost Saving Technology from Denmark
A soon to be released EPA report claims that in Denmark, small alternating direction oxidation ditches (ADOD) save as much as 70% of the cost for conventional oxidation ditches. The alternating...
The Development of a Design for a Breakwater at Keflavik, Iceland
A breakwater design was developed to be built using local quarried rock and relatively simple construction methods. The design significant wave height was 5.8 and the maximum depth of...
The Design and Construction of a Mass Armoured Breakwater at Hay Point, Australia
The design and construction of a prototype mass armored breakwater is briefly described. The paper also explores the practicality of allowing the progressive interaction of design, physical...
Water Power '87
The 1980's have been characterized as an era of uncertainty for world energy including future demand for energy, fuel prices and availability, regulatory constraints, environmental...
Building Code Requirements for Masonry Structures and Specifications for Masonry Structures
The proposed Building Code Requirements and Specifications for Masonry Structures presented in this book were developed by the Joint American Concrete Institute, American Society of Civil...
A Study in Nuclear Decommissioning
The Gentilly-1 nuclear power plant two year decommissioning project launched a series of firsts for the nuclear power industry. It was the first commercial sized plant in the world to...
Swiss Cheese Box Girders
Now going up in the French Alps, the Sylans and Glacieres viaducts have decks supported by three-dimensional arrays of concrete trusses. The superstructures look like concrete box girders...
High Strength High Rise
For the sixth time in history, a structure billed as the world's tallest concrete building (over 950 ft) is under construction in Chicago. The contractors describe the structure...
Specifications for Trenchless Excavation
Many advancements and innovations have developed recently in the utilization of trenchless excavation, techniques throughout the world. In many instances, design details and specifications...
Retrospective Look Into Design Challenges of Boston Interceptors
The purpose of this paper is to share with designers and owners a retrospective evaluation of a major sewer system design effort. The process by which a major sewer design project reaches...
New Installation Designs for Buried Concrete Pipe
The rational development of new installation designs for buried concrete pipe is described. Over 100 analyses were performed using a new computer program named SPIDA (Soil Pipe Interaction...
A Multilayered Model for Analysis of Composite Pipes
A multilayered model is developed to analyze the behavior of composite pipes, such as prestressed concrete pipe, to the combined effects of internal pressure and applied loads. The pipe...
Return to search