Transient Response of Guyed Telecommunication Towers Subjected to Cable Ice-Shedding
This paper presents the results of a numerical study of the transient response of guyed telecommunication towers subjected to sudden ice shedding from the guy wires. Detailed nonlinear...
Study on Reinforced Concrete Cylindrical Shells with Edge Members under Impact Loading
The strength, cracking patterns and the other nonlinear dynamic behaviors of reinforced concrete roof-type circular cylindrical shells influenced by edge member stiffness and supporting...
Nonlinear Analysis of a Reinforced Concrete Folded Plate Structure
This paper deals with the ultimate load analysis of a reinforced concrete (RC) folded plate shell subjected to dead load and monotonically increasing live loads, statically applied, using...
Ultimate Strength of R/C Cooling Tower Shell
Reinforced concrete(R/C) cooling towers are the largest, thin shell structures. It is important to assess the ultimate strength of R/C cooling tower shells subjected to wind load. In the...
Punching Shear of Reinforced Concrete Shell Structures
In reinforced concrete shells punching shear failure may take place, if heavy concentrated loads are applied. Such failure is undesirable, since it does not provide adequate warning and...
Efficient Nonlinear Analysis of Column-Supported Cylinderical Shells
This paper presents a finite element methodology for the study of geometrically nonlinear behavior of column-supported cylinder. Due to the discrete nature of the column supports, the...
Performance and Analysis of Frames With URM Infills
The interaction of unreinforced hollow concrete block masonry (URM) infill walls and gravity load designed (GLD) frames has been studied at Cornell University. The primary goal of this...
Lateral Response of Unreinforced Masonry Infill Frame Panels
This paper presents the results of the out-of-plane testing phase of the National Science Foundation Grant BCS 9102347. This project addresses the out-of-plane response to lateral loading...
How to Optimize Frames Using Plastic Design Concept
An optimal design procedure using plastic design concept was presented. For low-rise building frames, optimal plastic designs can be made using the plastic limit load as a basis of design....
Optimization for Earthquake Loads
Structural optimization for seismic loads can be approached from a deterministic or nondeterministic point of view. Deterministically, the major difference between optimization of statically...
Flange Local Buckling and Behavior of I-Sections
A simple kinematic model is proposed to determine the locally buckled shape of the compressive flange plate of I-sections subjected to pure bending or bending combined with axial thrust....
Tributary Loading with a Terrain Following Coordinate System
The modeling of physical processes that occur in a tributary between the farthest downstream gage and the lake interface can help to improve the predictive capabilities of Great Lakes...
Wave Transformation and Load Reduction Using a Small Tandem Reef Breakwater ? Physical Model Tests
The performance of several small reef breakwaters, and a tandem breakwater system (consisting of a reef breakwater positioned upwave from a surface-piercing main breakwater), are quantified...
Dynamic Loading of Airfield Pavements Caused by Aircraft Operations on Rough Runways
This paper presents results for dynamic pavement loading of various aircraft under takeoff and taxing scenarios. The data were obtained from computer simulation and applied to the Corps...
Prediction of Gravel Bedload with SAM
Bedload measurements for Little Beaver Creek in Colorado were used to test the sediment transport functions included in SAM. The test results showed that Toffaleti predicts total bedload...
Peak Runoff Prediction for Small Rural Watersheds
A regression model for peak runoff prediction from small rural watersheds was developed using the rainfall/runoff data collected from 43 watersheds in the front range of the State of Colorado....
Effect of Nonstandard Rainfall Distributions on Stormwater Management Detention Basins
A rural watershed is modeled to determine the effect of varying rainfall patterns on stormwater management detention basins designed for center peaking events. A hydrologic model of the...
Design Aspects of Modeling Reclaimed Water Use
The authors compare design aspects of modeling reclaimed water use with monthly and daily water balance protocols and review state regulations pertaining to use of reclaimed water. The...
Concrete Watertight Structures and Hazardous Liquid Containment
The purpose of
Retaining and Flood Walls
The engineering manual
Return to search