A Decision Support System for Nonpoint Source Pollution Management Using a Distributed Model-GIS-DBMS Linkage
Methods were developed for directly linking the distributed parameter model, AGNPS with a GIS and a relational database management system (RDBMS) to investigate a nonpoint source pollution...
FEM in a Design Code Environment
The results obtained from the use of finite element based analysis tools have created a new problem for designer: Which numbers do we use to check against Code limits? Most of the commonly...
Metamodeling Approach for Approximating the Operating Characteristics of Series of G/G/1 Queues on Congested Waterways
A simulation model representing waterway networks with queues at locks has been developed and validated. Functions developed from queueing theory were formulated to describe the operating...
A Decision Support System for Evaluating the Suitability of a Robotics System for a Construction Project
Development in the area of construction robotics/automation would require construction managers to critically evaluate the feasibility of replacing a conventional construction process...
3D CAD Modeling and Graphical Simulation of Mobile Cranes
This paper describes the research performed to lay a foundation for developing a graphical simulation system which can be used in the planning of heavy lifts using mobile cranes. Mobile...
CAD-Based Intelligent Drawings: An Automated Quality Control Approach to Land Development
Computer-Aided Design (CAD) is currently used within every discipline of civil engineering. Initially, CAD was employed solely as a drawing/drafting tool. Current CAD packages, in conjunction...
Issues and Experiences in Developing Shared Object Models
Effective communication of data among work processes is key to the successful operation of an Architecture, Engineering, Construction (AEC) project. However, communicating this data is...
Analysis of I-Girder Highway Bridges
Analysis of a bridge superstructure is complicated by the general geometric and loading conditions. Presented in this paper are three dimensional finite element modeling techniques used...
An Assessment of the Joint Factor as Used in the Modified MEXE Method
The finite element method has been used to examine the joint factor in the modified MEXE method which is documented in the publications (BD21/93 and BA16/93) by the Department of Transport...
Impulse Effect on Redundancy of a Tied-Arch Bridge
This paper studies the redundancy of a tied-arch bridge using a 3-dimensional finite element computer model. By using static incremental loading simulation, a tied-arch bridge designed...
Overlaying Digital Images with 3-D CAD to Document as Built Construction
A persistent problem in construction has been documenting changes which occur in the field and preparing as-built drawings. The accuracy and completeness of field measurements is often...
Graphic Visualization for Planning Heavy Lifts
The application of graphical visualization to construction can serve a wide variety of objectives and offers many significant benefits. Heavy lifts are an important component of industrial...
Transactional Support for Concurrent Finite Element Analysis & Design
The finite element (FE) analysis and design process deals with large amounts of complex engineering data. Although sophisticated techniques have been developed for computer-aided FE analysis,...
Hybrid Finite Element/Discrete Element Model for Large Deformation Geotechnical Engineering Problems
New hybrid finite element/discrete element computational code was developed for large deformation geotechnical engineering problems with granular materials. The code uses the finite element...
Analysis of Port Allen Lock in Elastic-Plastic Soil Medium
Incremental finite element analyses using Drucker-Prager plasticity model are applied to study the interaction of Port Allen Lock with its surrounding soil. The analyses not only consider...
The Development of an Expert System Used in Preliminary Design of Concrete Bridges
The importance of the selection of the best design on the one hand and the available knowledge, on the other during the preliminary design process asks after a different kind of software...
Time-related Deflections of Cantilever Bridges
Many prestressed concrete bridges with spans between 100 and 160 m have been built in the Netherlands. The method of construction is the so-called in situ free cantilever construction....
Conceptual Models of Product, Project and Document Data; Essential Ingredients of CIC
A number of current on-going national and international standardization efforts which develop standards for information structures in construction are reviewed in the paper. These concern...
DETMOD: A Desktop Estuarine Transport MODel
A microcomputer based numerical model designed to simulate the transport of substances within an estuary is presented. The Desktop Estuarine Transport MODel (DETMOD) features a Graphical...
Microworlds for Learning Through Inquiry
We discuss several computer-based environments to support learning through inquiry, called microworlds, including two focused on steam power plant operation and electronic troubleshooting....
Return to search