ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Robust Approach to Wave Runup Calculation
Wind wave runup on a natural beach is examined for the case of an irregular wave forcing function. A pragmatic approach to the calculation of the runup time series and the corresponding...

Application of Extremely Low Altitude Photogrammetry for Monitoring Coastal Structures
Extremely low altitude mapping photography exposed from a helicopter is showing considerable promise in providing another method of extending the many benefits of photogrammetric data...

Value Engineering in Coastal Design
A formal procedure of value engineering can be applied to coastal design to refine a design and reduce the construction costs. Despite the relatively simple technology and materials used...

Sandbridge Virginia Oceanfront Seawall Arbitration Hearing: Some Lessons Learned for Coastal Engineers
A group of beach property homeowners claimed that their new oceanfront seawall was defective in design. A beefed-up design cost about $1.3 million more and they sought this amount from...

VOCs: The New Effluent
The Clean Air Act of 1990, in addition to many state and local regulations, has officials of publicly-owned treatment works (POTWs) shifting their focus, and funds, to air toxic emissions...

Flexible Porous Breakwater
This is a theoretical study of the reflection and transmission of linear waves by a flexible, porous and thin beam-like breakwater held fixed in the sea bed. The breakwater is idealized...

Screen Breakwaters
The diffraction of water waves by an offshore breakwater consisting of an infinite row of equally-spaced vertical screens is investigated theoretically. The reflected and transmitted wave...

Wave Induced Vortex Near Seashore
The vortex motion behind submerged breakwaters in the nearshore region is studied. The RCPWAVE model (Ebersole et al., 1986) is used to calculate the wave field and thus the radiator stresses...

Full Scale Application of Active Bracing Systems
A full scale active bracing system has been installed in a structure in Tokyo, Japan. The practical problems associated with the implementation of this system, and the corresponding solutions...

Modeling Nearshore Currents in the Vicinity of the Endicott Causeway, Alaska
The Endicott Causeway connects two oil production islands on the southern side of Stefansson Sound, about 5 km offshore of the Sagavanirktok River delta, to the mainland of the Alaskan...

Impact of Breakwater Removal on Hydrodynamics and Water Quality in Flushing Bay, New York
Hydrodynamic and water quality models were used to simulate the potential effect of removing a breakwater to increase flushing and improve water quality in Flushing Bay, New York City....

Housing Opportunity or Social Engineering Implementing the Jobs-Housing Relationship?The Town of Wellington Experience
The proposed Town of Wellington project in Palm Beach County, Florida, was planned based on the needs related to the jobs-housing relationship identified in the area. The conditions placed...

Incorporating Corrosion in Reliability-Based Design of Anchored Bulkheads
Corrosion of steel is an important factor in the design of marine structures. A reliability analysis of anchored bulkheads showed that corrosion changes the critical failure mode from...

Deep Water Container Wharf & Crane Foundation
A deep water anchored steel bulkhead and a parallel-independent low-profile, pile supported crane rail foundation with special stowage areas are discussed from soils investigation, through...

Riprap Design in Marine Terminals
Navigation vessels in otherwise quiescent waterways sometimes generate forces that require stabilization of the bed or banks. Since riprap is an accepted and dependable means to armor...

Design and Construction of Waterfront Facilities at U.S. Navy Homeport at Ingleside, Texas
The waterfront facilities for the largest of the Navy's new homeports in the Gulf of Mexico were completed in 1990. The project included over 2,500 feet (762 m.) of deep draft bulkhead...

Replacement of a Deteriorated Steel Sheet Pile Bulkhead
This paper presents a life history of a marine steel sheet pile bulkhead, over 35 years old, that has been exposed to a salt water environment with minimal maintenance or repair in the...

Historic Seawalls of the Boston Harbor, Massachusetts Region: Evolution, Construction and Repair
The earliest seawalls in the Boston region were of crib construction. Cobb cribs had an open framework and could readily be floated into position and sunk with rock from local sources....

Draft Chapter 2?Planning and Design Guidelines for Small Craft Harbors?Entrance Design and Breakwaters
The paper will present a very preliminary draft of the second chapter of an ASCE manual that is currently being developed. The new manual is entitled Planning and Design Guidelines for...

Delaware Estuary Nonpoint Source Control Program
Preparation of the Delaware Estuary Management Plan, sponsored by the EPA and the three states of New Jersey, Pennsylvania and Delaware, is part of the national estuaries program. As part...

 

 

 

 

Return to search