Estimation of Unsampled Sediment Discharge
A procedure is developed to estimate the total bed material load without using the size distribution of suspended load. Because of the uncertainties involved in the calculation of the...
Movement of Sediment Mixtures in a Parabolic Flume with Simulated Rainfall
A 4-m long flume with parabolic cross section and adjustable slope was constructed to investigate the sediment carrying capacity and the variation of grain size distribution during deposition....
Bed Topography and Sorting in Alluvial Channel Bends
A quasi-three-dimensional model has been developed for the purpose of calculating the velocity distribution, the bed topography and sediment sorting along channel bends. The depth-averaged...
Surface Roughness with Erosion of Earth Channels
A determination of the stresses effective in soil detachment is essential in determining erodibility. The soil roughness that exists during testing and in natural channels is a key element...
Cold Regions Engineering
This volume contains papers that were presented at the 5th International Cold Regions Engineering Specialty Conference, sponsored by ASCE and held in St. Paul, Minnesota, February 6-8,...
Ports '89
This is a collection of the technical papers presented at the triennial Ports '89 Conference held in Boston, Massachusetts in May 1989. Authors, although predominantly from...
Cincinnati's Dream Team
For years, the cries of Cincinnati's Public Works Department and its civil engineers for infrastructure repair fell on deaf ears. In 1986, Mayor Charles Luken tried a new...
The Effects of Bank Protection on River Morphology
Revetment of bends with radius of curvature to width ratios (R/W) between 1.9 and 3.3 on Red River AR, and Sacramento River CA, does not cause the expected thalweg deepening and channel...
An Ongoing Investigation of Residual Suspended Material Transport in Central San Francisco Bay, CA
A study of suspended material transport in San Francisco Bay, California, is presently underway by the U.S. Army Corps of Engineers. This paper describes preliminary numerical model and...
Automation of Existing Dam Control Schemes
For installations that are already in operation, the following advantages are obtained from installing new electronic equipment: In the case that the dam or certain measuring stations...
Design and Construction of the Moose River Hydroelectric Project
The project's main features are: a 7 ft high, 240 ft long cast-in-place concrete overflow weir; bell mouth entrance concrete intake structure with trashrack and trashrake;...
Reduced O&M Costs through Better Metallurgy
There are many areas in hydroelectric power plants where better materials of construction can reduce operation and maintenance (O&M) costs. Some of the most nagging problems deal...
Asphalt-Rubber Concrete?A New Horizon
The performance of asphalt concrete pavements is dependent to a large degree upon the rheological properties of the asphalt binder. Asphalt-rubber as a binder material extends the temperature...
Hot Mix Asphalt Utilization in Railway Trackbeds
Described herein are the rationales for, descriptions of and evaluations of hot-mix asphalt (HMA) trackbed rehabilitation and construction techniques recently utilized in various classes...
Liability Traps to Avoid
This presentation shows several problem situations and the rules of the game as played by the industry and the courts. It makes three basic assumptions. One, the Materials Engineer knows...
The Asbestos Agenda
Asbestos abatement business has been booming for years. The industry, though, is not restricted only to firms which do the removal. Companies who provide training, sell supplies and develop...
Box Segmentals: Refining Design
Officials at the Florida Department of Transportation (FDOT), which has built more precast concrete segmental box girder bridges than any other state, say their troubles with that design...
New Roof for an Aging Temporary
The wartime temporary design of a 1942 industrial building justified use of green timber for its roof trusses and higher than usual allowable design stresses. Some 45 years later, a new...
Building the Perfect Playpen
Today, the stadium itself has become almost as important as the teams playing the game. Eschewing the standard cookie-cutter design of the 60s, clients and owners generally have a laundry...
Isolated Examples
The technology of seismic isolation, also known as base isolation, is being used to protect the contents and occupants of a building as well as its structure. Isolators are led-rubber...
Return to search