Applications of Wood Materials for Innovative Bridge Systems
This paper describes completed research and the status of research underway on timber bridges that are part of the USDA Forest Service timber bridge initiative. The initiative includes...
Rate Effects in the Deformation of Rocks
This paper gives a brief review of creep and rate effects on the behavior of rocks, within a wide range of confining pressures and temperatures, and with a special emphasis on the physical...
A Microplane Constitutive Model for Soils
A microplane model for the inelastic behavior of soils is presented. The microscopic constitutive equations are defined independentely for a set of microplanes covering all possible orientations,...
Rate Effects on Fracture of Concrete
An analytical and experimental investigation of mode I (tensile and mixed mode (combined tensile and shear) fracture of concrete subjected to impact loading was conducted. The rate of...
Creep of Polycrystalline Ice
This paper discusses the extension of creep models for polycrystalline ice to include the effects of a non-monotonic loading history. Attention is focussed on cyclic loading since it is...
Improved Prediction of Masonry Durability Through Advanced Materials Science Methods
Several trends in the use of materials in civil engineering have made it imperative to improve the ability to predict the durability of masonry. This will require more emphasis on materials...
Premature Failures of Outdoor Masonry Pavements
The authors have investigated and repaired a number of premature inservice failures of masonry paving systems in recent years. These systems have become common, built over underground...
Building Joint Movement
Moisture leakage in masonry claddings occurs not only through copings and facial separation cracks, but also through failed sealant joints in the veneer. The factors affecting joint movement...
Use of Voluntary Consensus Standards by the Bureau of Reclamation
This paper outlines how the Bureau of Reclamation has historically participated in standards development for emerging technologies, and how present standards are applied or adapted for...
Asphalt Cement Specifications and HMA Performance
The standard specifications generally used for hot mix asphalt (HMA) are those published by the American Society for Testing and Materials (ASTM) or the American Association of State Highway...
Are ASTM Standards Enough?
ASTM (American Society for Testing and Materials) is most likely the World's most renown developer of voluntary consensus standards. Its standards development process utilizes...
Construction Quality Assurance for Geomembranes
The results of and lessons learned from construction quality assurance (CQA) programs on 19 geomembrane liners are presented. The specifications are generally exceeded by comfortable margins...
Geocomposites Simplify Methane Barrier/Venting System Design
A case history describing the use of a geomembrane and geocomposite to simplify the design of a combined subsurface barrier and venting system is presented. The passive barrier and venting...
Fiber Reinforced Plastic Grids for the Structural Reinforcement of Concrete
The use of fibre resin plastic grid is investigated as a primary bending reinforcement in concrete members. Laboratory bending data is compared with theoretical results using ACI 318-83...
Spectral Techniques for Serviceability and Durability Assessment of High-Performance Construction Materials
Using spectral techniques, one can obtain the frequency content of a material specimen. Spectral measurements were made on specimens of Portland cement and a polymer based materials. In...
Practical Prediction of Concrete Shrinkage and its Uncertainty
An improved prediction model for shrinkage is proposed. The main features are (1) diffusion-type size dependence for humidity effects, (2) initial and final asymptotic forms of the shrinkage...
A Test Method to Evaluate Shrinkage Cracking of Concrete
The possibility of shrinkage for a given drying environment depends on the following factors: free shrinkage, creep, and age-dependent properties of concrete. A common way to account for...
A Prestressed Kevlar/FRP Structural System
The strength/stiffness characteristics of a new lightweight composite structural system have been investigated in this study. The proposed system is constructed of FRP(E-glass/isophthalic...
U.S. Coast Guard Experience with Commercial FRP Vessels with Respect to Structural Reliability
The U.S. Coast Guard currently inspects over 1000 fiber reinforced plastic (FRP) vessels used in commercial passenger service. The designs include monohulls, catamarans, hydrofoils and...
Design of Fiberglass Reinforced Plastic Underground Storage Tanks
The purpose of this paper is to discuss the design and construction techniques of fiberglass composite underground storage tanks. The scope of this paper is limited to the straight shell...
Return to search