Throgs Neck Bridge: Why Did Its Deck Deteriorate?
Rapid deterioration of the concrete roadway decks of the Throgs Neck Bridge approach viaducts was found to be due to secondary tensile and fatigue stresses brought on by deflection of...

Steel Beats Concrete for Idaho Bridge
As an alternative to prestressed concrete design, the State of Idaho and the Federal Highway Administration encouraged the use of cable-stressed steel girder design for the Bonners Ferry...

Frost Inducing Slides on Membrane-Lined Canal Slopes
Freezing beneath a polyvinyl chloride membrane lining caused water in the subgrade soil voids to migrate upward and to form thin ice lenses under the lining. During a spell of warm weather,...

Overview: Introduction to Cold Region Construction
Speaking of cold region construction, it is natural to think only of the arctic, however, this is completely erroneous. Throughout North America there are various types of cold region...

Cold Regions Earthwork
The purpose of this paper is to outline the state-of-the-practice in cold regions earthwork based on experience gained in the Prudhoe Bay area of Alaska. Material properties of fill used...

Thaw Settlement Analysis for Buried Pipelines in Permafrost
This paper focuses on determination of allowable thaw settlement for the design of cross country pipelines in permafrost areas. The purpose of the thaw settlement evaluation is to aid...

Flanged Reinforced Concrete Flexural Members
Design aids in the forms of charts and tables are available for design of reinforced concrete flexural members. Many of these design aids were developed for design of rectangular cross...

Passive Solar and Daylighting Cut Building's Energy Use
The headquarters building for Gulf Mineral Resources Co. near Denver requires about one-quarter of the energy generally used in a new conventional building. A double skin provides a thermal...

Pipelines in Adverse Environments II
State of the art and future trends in pipeline design, construction and maintenance are reviewed. Specific areas addressed include adverse terrain conditions, river crossings-particularly...

Geological Environmental and Soil Properties
Proceedings of the Geological Environment and Soil Properties Convention held in Houston, Texas, October 17-21, 1983. Sponsored by the ASCE Geotechnical Engineering Division. Geological...

Journal of Environmental Engineering
The Journal of Environmental Engineering presents broad interdisciplinary information on the practice and status of research in environmental engineering science, systems engineering, and sanitation. Papers...

Micro-Computer Program: Roof Purlin Design
A micro-computer program is explained in step-by-step manner as a shortcut for biaxial bending design with results in as little as 60 seconds. Biaxial bending requires the consideration...

The Booming Business in Wick Drains
Prefabricated vertical wick drains, used to improve weak, saturated soils, have been used in Japan and Europe for 20 years but were introduced in the U.S. only four years ago. Since then...

Grouting in Geotechnical Engineering
The 63 pages included in these proceedings came from 12 different countries and deal with the pertinent advances in grouting materials and technology that have occurred throughout the...

Application of Plasticity and Generalized Stress-strain in Geotechnical Engineering
This volume on the application of plasticity and generalized stress-strain in geotechnical engineering is divided into two main sections, with an introduction on soil constitutive model...

Engineering and Construction in Tropical and Residual Soils
Thirty-one papers and six invited lectures presented at the specialty conference on engineering and construction in tropical and residual soils are included. The proceedings represent...

Engineer's Notebook: One-step Formula for R/C Tension Steel
In the design of reinforced concrete beams, after loadings and materials are defined, the first step is to assume a beam depth. Then the required steel area and beam width are determined....

Cold Regions Engineering in Norway
The use of insulating materials is a key factor in cold regions engineering in Norway. It is applied in road construction in areas where frost heave and reduced bearing capacity would...

Fiber-Reinforced Concrete Proves Worth for Airport Pavements
Laboratory and field tests indicate that fiber-reinforced concrete has higher flexural and tensile strength, higher impact resistance, and improved resistance to spalling and joint deterioration...

Environmentally Sound Water and Soil Management
These proceedings contain the papers and abstracts presented at the 1982 Irrigation and Drainage Division of the American Society of Civil Engineers Specialty Conference held in Orlando,...

 

 

 

 

Return to search