A Computer Model for Oil Slick Transport in Rivers
A computer model for simulating oil slick transport in rivers is presented. In the model the effects of advection, spreading, evaporation, and dissolution on the transformation of an oil...
Evaluation of PCP/Oil Spill on CFT Indian Reservation Near Nespelem, Washington
This paper presents the immediate action taken, the field work performed, and the engineering analysis performed in response to a spillage of a solution of pentachlorophenol (PCP) and...
Flow and Sediment Transport in Curved Channels with Nonuniform Bed Material
Described is a scheme for controlling the exchange of grain sizes between bed and bed load in a curved alluvial channel. The scheme is an integral part of a model for simulating spatial...
A New Technique for Measuring Fine Sediment Accumulation in Gravel Bed Streams
The collection and analysis of bed material samples has been a standard practice for determining the quantity of fine sediments (less than 3. 4 mm diameter) in stream gravels. However,...
Physical Habitat Simulation and the Moveable Bed
One objective of an instream flow analysis is to quantify a flow that will maintain the existing channel and/or flush fine material from the bed. Five empirical approaches to determine...
Development of the Nauvoo Point Plant Beds
In Pool 19, Mississippi River, the accumulation of sediment has resulted in soft-substrate benthic communities or macrophyte beds. Three areas in the downstream 12 miles of the 46. 3 mile...
Guidelines for Maintenance of Aging Water Pipes
Break failure patterns are investigated by applying a new methodology based on Proportional hazards and Poisson-type models. Application on two water distribution systems of North-Eastern...
Long Reinforced Concrete Columns
Papers selected by the Reinforced Concrete Research Council of ASCE. This collection contains 13 papers reporting the results of a series of studies,...
Reviewing for Potential Failure
The key to preventing structural failures is to examines them and develop systematic techniques for avoidance. One, called contingency analysis, starts with a what if process to decide...
Available Compaction Equipment
When discussing available compaction equipment we must keep in mind the purpose of compaction. Compaction is the art of artificially increasing the density or increasing the unit weight...
Construction of Roller-Compacted Concrete Pavement
Roller-compacted concrete pavement (RCCP) is the product of a relatively new concrete paving technology in which a zero-slump portland cement concrete mixture is spread with modified asphalt...
Epoxy Repair of a Glulam Beam
The repair of timber structures by epoxy injection techniques is a recently developed repair alternative. Theoretical and experimental studies have resulted in the formulation of design...
Hypars and Wood Shells?The Boston College Recplex
For the past twenty years, we have been involved in the design and construction of intermediate span wood hyperbolic paraboloid. During that time the spans have ranged from 50 ft. to 200...
Guide to Investigation of Structural Failures
Prepared by the Research Council on Performance of Structures of ASCE. This report contains guidelines for conducting an investigation into the causes...
Managing Two Projects as One
The Port of Tacoma completed a new two berth container terminal and intermodal yard for Sea-Land in May 1985, only 26 months after signing a binding agreement. The project, which also...
Keeping Sand at a Standstill
Construction of roads, railroads, pipelines and other facilities removes the native vegetation from sand dunes. As a result, sand movement starts and entire dunes may become active. This...
Reliability Constraint on Optimum Design
The purpose of the paper is to emphasize the importance of the probability concern on optimum design work. The probability of failure of the structure can be considered as one of the optimum...
The Effects of P-Delta and Semi-Rigid Connections on Response Behavior of Inelastic Steel Frames Subjected to Cyclic and Seismic Loadings
A numerical method is presented for analyzing semi-rigid connected steel frames subjected to various time-dependent excitations with consideration of damping, nonlinear material behavior...
U.S. Bureau of Reclamation Use of Risk Analysis
The United States Bureau of Reclamation (USBR) has been using risk analysis techniques in assessments for management decisions. Before presenting USBR practice and experience, the paper...
Computer Assisted Pavement
In Rancho Palos Verdes, Calif. a 4,300 ft. long test installation of the Contained Rock Asphalt Mat (CRAM) Pavement System is expected to have a 50 year life. It cost a third less than...
Return to search