Riprap Design in Marine Terminals
Navigation vessels in otherwise quiescent waterways sometimes generate forces that require stabilization of the bed or banks. Since riprap is an accepted and dependable means to armor...
Non-Intrusive Rayleigh Wave Measurement System for Soil Profiling in Ports
Accurate shear wave velocity profiles have been long recognized as essential data to evaluate the dynamic response of soil deposits and soil-structure interaction under earthquake and...
Proposed Seismic Design Method for Piers and Wharves
Current seismic provisions of the 1991 Uniform Building Code (UBC-91) and the 1983 AASHTO Seismic Design Specifications (AASHTO) are compared as they relate to piers and wharves. An alternate...
Earthquake Damage Repair and Retrofit of the Seventh St. Terminal Port of Oakland
The October 17, 1989 earthquake resulted in the collapse of the two-level Cypress St. Freeway in Oakland. Television and newspaper coverage revealed the tragic loss of life and property...
A Computational Berthing Model for the Design of Fender Systems
The IRF numerical model has not been widely applied to the design of fender systems although the method has been extensively confirmed by hydraulic model tests and partially verified by...
Design Criteria for Ferry Landings
This paper describes an ongoing research project conducted by the University of Washington Department of Civil Engineering to develop design criteria for the Washington State Ferry System....
U.S. Navy Deployable Waterfront Facility
The U.S. Naval Civil Engineering Laboratory (NCEL) has been developing the concept of a Deployable Waterfront Facility (DWF) as part of its technology development programs for the enhancement...
Land Reclamation Design for the Port of Los Angeles' 2020 Plan
In order to meet future cargo demands the Ports of Los Angeles (POLA) and Long Beach in conjunction with the United States Army Corps of Engineers have conducted a long-range planning...
Results of a Monitoring Program of Moored Ship Response to Gravity and Infragravity Waves
An automated monitoring system was designed and operated at a coal terminal in Los Angeles Harbor, and a container terminal in Long Beach Harbor, to obtain the complete six degree-of-freedom...
Pre-Compression of Concrete Breasting Dolphins Solves Construction Problem
A roll-on/roll-off ferry terminal was built in Quincy, Massachusetts in 1989 as part of a marine transportation system to support construction of the sewage treatment facilities proposed...
Pier and Wharf for U.S. Navy Homeport, Everett
Design of the homeporting facilities at Everett, Washington, began in 1985. The U.S. Navy and the design team were faced with many challenges, including a waterfront site containing contaminated...
Naval Homeport Facilities at Pensacola, Florida, and Mobile, Alabama
Presented herein are histories for the planning, design, and construction of the Navy's two newest homeport waterfront facilities in the Gulf of Mexico. Included are the waterfront facilities...
Design and Construction of Waterfront Facilities at U.S. Navy Homeport at Ingleside, Texas
The waterfront facilities for the largest of the Navy's new homeports in the Gulf of Mexico were completed in 1990. The project included over 2,500 feet (762 m.) of deep draft bulkhead...
Underground Refrigeration Outlets
This paper discusses facilities for underground refrigeration at terminal at Port of Tacoma, to provide services to Evergreen line, the worlds largest container shipping company....
Floating or Fixed Dock for RO/RO Ship Operations
Floating pontoon-type dock structures are typically used for RO/RO ship berthing. Primary advantage of a floating dock for RO/RO berthing is the relatively constant height relationship...
Modern Crane Control Enhancements
Terminal operators are continually looking for innovative ways to enhance the productivity and safety of their container cranes. This paper discusses examples of control enhancements that...
Upgrading Today's Terminals for Tomorrow's Needs
This paper describes how a 1940's vintage, timber pile supported wharf is being modernized to serve post-Panamax ships: how the Massachusetts Port Authority (MASSPORT) is rebuilding their...
Replacement of a Deteriorated Steel Sheet Pile Bulkhead
This paper presents a life history of a marine steel sheet pile bulkhead, over 35 years old, that has been exposed to a salt water environment with minimal maintenance or repair in the...
Terminal Asphalt Patching: An Innovative Approach
Asphaltic concrete has dominated the terminal industry as the pavement of choice for years. It is readily available and economical to install but requires considerable maintenance expense....
Historic Seawalls of the Boston Harbor, Massachusetts Region: Evolution, Construction and Repair
The earliest seawalls in the Boston region were of crib construction. Cobb cribs had an open framework and could readily be floated into position and sunk with rock from local sources....
Return to search