Nonlinear Response of Ground Supported Slabs
Refined techniques for the structural analysis of ground supported concrete slabs are presented. The principles of limit state design in terms of strength and serviceability are implemented....
Safe-Load-Limit of Plates in Cylindrical Bending
The derivation of a closed-form expression for the viscoelastic critical load of long thin plates undergoing cylindrical bending and made of a linear time-dependent 'solid'-type...
Interlaminar Fracture Toughness Test: Traditional and Modified
For brittle, transversely isotropic, composite materials we have developed an alternative Mode II interlaminar fracture toughness test (GIIc) that...
Design Considerations for Large-Scale Filament-Wound Composite Structures
An experimental investigation was conducted to quantify scaling effects in filament-wound composite structures. These preliminary results support the notion that an increase in thickness...
Optimum Design of Laminated Metal Matrix Composites
With the increased demand for high-strength, lightweight materials that function successfully in high temperature environments, the effective development of metal matrix composites has...
Elastic Stability of a Laminated Column
Buckling load of an unsymmetric, laminated column is obtained through the use of imperfection method. The condition requiring to have non-vanishing bending moment at the ends of a pinned-pinned...
A Damping Model for the Vibration of Nonlinear Laminated Composite Cylindrical Panels with High Order Transverse Shears
The damping characteristics of nonlinear vibration of a cylindrical panel including large displacements/rotations and parabolic transverse shears has been discussed in this study. The...
On the Adhesive Strength of Viscoelastic Fibrous Composites
A methodology for solving problems of anisotropic materials using the theory of elasticity (viscoelasticity) is presented. Some results on specific problems related to the stressed-and-deformed...
Statistical Strength Analysis of Composites
A new modified six parameter Weibull distribution model has been adopted to analyze strength data structure of ARALL laminated and graphite-epoxy composites. This model shows better correlations...
Finite Element Analysis and Testing of a Laminated Composite Fuselage Test Structure
A test structure modeling a full scale section of a composite aircraft fuselage was designed, analyzed, fabricated, and pressure tested. The test structure consisted of a cylindrical graphite...
Flexural and Extensional Motion of Moderately Thick Laminated Composite Plates
A general theory of flexural and extensional motion of moderately thick laminated composite plates is developed for linear elastic materials and small deformation. Interlaminar stresses...
Damage Tolerance of Composites
The damage tolerance issue in composites is driven by the requirement for and implementation of a structural integrity criterion for a structural system. A key element in the design philosophy...
Coupled Bending and Twisting of Thin-Walled Composite Beams
Thin-walled open-section composite material beams of the T, I and J geometries are routinely used as stiffeners for structural components in aerospace vehicles (Starnes et al, 1985). In...
Failure Characterization of Structural FRP Bars
A combined experimental and theoretical investigation on the structural behavior of fiber reinforced plastic (FRP) bars is presented. Test results indicate that the ultimate strength decreases...
On the Design of Laminated Composite Flange: A Model with Experimental Verification
A parametric model has been developed for the optimum design of laminated composite flange. The study focuses on the evaluation and performance optimization of composite flanges with the...
Bond Strength of Reinforcing Bars in SIFCON
This paper presents a brief summary of an ongoing investigation on the bond characteristics of deformed reinforcing bars embedded in a SIFCON matrix. A significant increase in bond strength,...
Mixture Considerations for High Performance Cement-Based Composites
In the present paper, mixture considerations for producing high performance cement-based composites are discussed. Effects of different factors such as grain size and fiber reinforcement...
Studies of the Interfacial Properties of Fiber Reinforced Cement
The multiple fiber pull-out tests were conducted with steel wires and alkali resistant glass fiber strand in order to characterize the behavior of interface of fiber and cementitious matrix....
Simulation of Failure Processes in Cementitious Particle Composites
Progressive failure analysis in cementitious particle composites such as concrete requires a realistic description of the topology of the composite structure and the interaction of the...
Strain Rate Effects on Pressuremeter Testing
This paper discusses the effect of strain rate on the cavity expansion problem and pressuremeter test. A cuboidal shear device, CSD, was used to perform pressuremeter strain path tests...
Return to search