Ambient Vibration Tests of a Suspension Bridge
Originally published in: Journal of the Engineering Mechanics Division, ASCE, EM5, October 1978, pp. 983-999...
Seismic Design of Liquid Storage Tanks
Originally published in: Journal of the Technical Councils, ASCE, TC1, April 1981...
Development of Hydraulic Structures
The Bureau of Reclamation was established in 1902. Since that time, Reclamation has constructed more than 220 dams. Each dam, depending on its function, has two or more principal hydraulic...
Cold Regions Hydrology and Hydraulics
The Cold Regions Hydrology and Hydraulics Monograph is the eighth in a series of monographs prepared by the ASCE Technical Council on Cold Regions Engineering. The book is intended to...
Wind Bracing
This chapter discusses the structural design of the bridge with regards to wind forces....
The Abutments and the Structural Defect
This chapter discusses the bridge's abutments....
Building Moon Bases
It is widely accepted that the U.S. will begin to build a base on the moon at the turn of the century, and much of the design work has already been done. Based on papers presented at Space...
Deck Park Covers Phoenix Freeway
The last link in interstate I-10, the coast to coast highway from Florida to California, will be completed in Phoenix, Arizona in 1989. The last eleven-mile section through Phoenix has...
New Piers for an Old Bridge
Placing new piers under an old superstructure has saved the architecture of the historic Ashley River Bridge in Charleston, S.C. In July 1987, an inspection indicated deterioration and...
The Pros and Cons of Public Education
Today, engineers work for a public that has lost faith in the government's ability to spend money efficiently and to contain pollutants effectively. Many engineers now see...
Load-Permit Truck Operations in New York State
This paper presents the results of a survey of indivisible-load permit vehicle operations in New York State. The survey was conducted in the context of an investigation into the impacts...
Expressway Centerpiece
The center span of the Napoleon Bonaparte Broward Bridge, better known as the Dame Point Bridge over the St. Johns River at Jacksonville, Fla., is the country's longest cable...
An Overview of Structural Reliability Methods
Recent developments in structural reliability theory and better availability of load and strength data suggest that reliability-based design (RBD) methods should be considered as a practical...
Assessment of Conductors
This paper deals with the mechanical integrity of conductors after several years in service and discusses current innovative conductor designs which benefit the structural designer working...
Cambering of Steel Beams
Cold cambering with force in the fabrication shop is an effective and economical method of compensating for deflections of composite beams. Typical beams should be cambered for dead load...
Engineering Design Concerns Regarding Steel Fabrication
The precise fabrication of structural steel pieces is an essential part of the process leading to the satisfactory erection and connection of the individual steel elements into the final...
Six Story Tubular Atrium
The author designed an atrium structure with two stair-stepped atriums placed at 45? to the tower 'Figueroa at Wilshire' in Los Angeles, California. This structure...
The Fabrication and Erection of the Minneapolis Convention Center
A new convention center is part of the City of Minneapolis' successful plan to maintain an economically strong downtown core. It is the latest addition to a list of civic...
Changes in Tubular Design Codes
This paper summarizes a number of changes in design provisions for tubular structures that have recently been adopted. These are the result of a number of research advances concerning...
Sizing Techniques for Lateral Bracing
Techniques for determining the size of lateral bracing members in multi-story steel buildings are presented and discussed. Because the design of such bracing is usually controlled by deflection...
Return to search