Seismic Design of Liquid Storage Tanks
Originally published in: Journal of the Technical Councils, ASCE, TC1, April 1981...
Building Moon Bases
It is widely accepted that the U.S. will begin to build a base on the moon at the turn of the century, and much of the design work has already been done. Based on papers presented at Space...
Diatomaceous Soils: A New Approach
Diatomaceous soils are formed over long periods of time when the skeletal remains of plankton and other single-celled marine creatures sink and accumulate in lakes, estuaries and oceans....
High Tech on Campus
Hannan Hall, the new laboratory building at The Catholic University of America, has a structure entirely made up of precast concrete panels and 24 in. deep double tees. The loadbearing...
Orchestral Maneuvers
Symphony Towers is an H-shaped superstructure that straddles Symphony Hall in downtown San Diego. The $143 million project is a 34-story office building to the south of the hall and a...
Brace Behavior in a Structural Steel Seismic Retrofitting Scheme
A two thirds scale non-ductile reinforced concrete frame strengthened by an external structural steel bracing scheme was constructed and tested in the laboratory. The frame was subjected...
Seismic Behavior of Built-Up Bracing Members
The influence of stitch design and local buckling on the seismic behavior of welded bracing members made of double angles is studied in this paper. Performance of boxed configuration with...
Seismic Response of Flexibly-Connected Steel Frames
The response of typical low-rise steel building frames designed by the 'Type 2 Construction' method to moderate earthquakes is examined. Such frames are often...
Tests on Brace and Link Connections for EBFs
This paper describes recent test results on the behavior of selected connections for seismic-resistant Eccentrically Braced Frames (EBFs). These tests provided data on the performance...
End Plate Moment Connections for Cyclic Loads
Three pilot tests of full size end plate moment connections under cyclic loading are discussed. In one of the specimens, the premature fracture of one of the inner bolts suggests the possibility...
Optimal Location of Active Controllers Subjected to Seismic Excitation
In the application of structural control to seismic structures certain locations are advantageous for placement of the actuators. These locations reduce the structure's response...
BABE: An Expert System for Structural Design of Bridge Abutments and Piers
A knowledge-based expert system named 'BABE' (Bridge and Building Evaluation) has been developed for the purpose of helping the user in planning, analysis and...
An Integrated Knowledge System of Seismic Vulnerability and Risk for Engineered Facilities
This paper describes an integrated knowledge system for the assessment of the seismic vulnerability and risk of engineered facilities. The system integrates knowledge from many fields...
A Knowledge Based System for Deriving Qualitative Seismic Behavior
The analysis and design of complex or critical facilities, such as tall buildings, nuclear power plants, offshore structures, or cable stayed bridges requires that these facilities be...
A Knowledge-Based System for Evaluating the Seismic Resistance of Existing Buildings
The large number of existing buildings designed without considerations of seismic loading warrants the development of computer aids for the evaluation of their seismic resistance. Since...
Testing of Reinforced Concrete Bridges for External Reinforcement
Several continuous reinforced concrete slab bridges were constructed in the 1950's with spans ranging from 30 ft. to 60 ft. Longitudinal cracks were observed in the tension...
Sulfate Attack on Concrete Containing Fly Ash
The use of fly ash as a portland cement replacement in concrete may provide many technical and economic advantages. One such technical advantage is to improve the resistance of concrete...
Fatigue and Fracture Evaluation of Riveted Bridge Members
Among the major concerns of bridge engineers today are the fatigue damages that have been accumulated in riveted members and the safety of riveted structures. Many of these structures...
Fatigue Evaluation of a Riveted Railroad Bridge
An 83 year old railroad bridge was analyzed for fatigue based on historical records such as the original schedules. Based on the number of cycles to date, corresponding to an effective...
Fatigue Behavior of Steel Connection Angles
A method for predicting the fatigue behavior of flange angle elements is presented. The primary emphasis herein concerns an analytical approach for evaluating the fatigue life of flange...
Return to search