ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Compilation/Validation of Thermodynamic Data for Plutonium for Nuclear Waste Disposal: 1. Preliminary Results
A provisional thermodynamic database for plutonium has been compiled from a review of available data and other critical compilations. The database was compared to tabulations of Gibbs...

Predicted Thermal and Stress Environments in the Vicinity of Repository Openings
An understanding of the thermal and stress environment in the vicinity of repository openings is important for preclosure performance considerations and worker health and safety considerations...

Microwave Measurements of the Water Content of Bentonite
The theory of operation of microwave coaxial resonators is described. Sample preparation and the application of resonator techniques to the measurement of the permittivity (dielectric...

Disposal of Vitrified Waste in an Unsaturated Environment
An experimental program is described wherein the effect of important independent variables on glass reaction under conditions that may exist for unsaturated storage is examined. The effect...

Development of a Structural Model to Analyze Public Opinion on a High-Level Radioactive Waste Facility
Studies show that Nevada residents and state officials oppose the proposed high-level radioactive waste repository project at Yucca Mountain. Nevada residents view the Yucca Mountain repository...

Boundary Integral Methods for Unsaturated Flow
A boundary integral equation method (BIEM) is described for numerical analysis of quasilinear steady unsaturated flow in homogeneous material. The applicability of the exponential model...

Effect of a Low-Permeability Layer on Calculated Gas Flow at Yucca Mountain
Yucca Mountain is being studied to determine its suitability as a location for a high-level nuclear waste repository. The mountain is a steep-sided linear ridge which is underlain by a...

The Integrated Performance Assessment in SKI Project-90
The SKI Project-90 is a performance assessment of a hypothetical repository system with KBS-3 features in crystalline rock. A large part of the effort has been to identify and characterize...

Comparison of Elastic and Inelastic Analysis and Test Results for the Defense High Level Waste Shipping Cask
In the early 1980's, the U.S. Department of Energy/Defense Programs (DOE/DP) initiated a project to develop a safe and efficient transportation system for defense high level...

Modelling of Excavation, Thermal Loading and Bentonite Swelling Pressure for a Waste Repository
For the performance assessment of a future nuclear waste repository, the excavation of the tunnel and deposition hole, thermal loading from waste heat release and the swelling pressure...

Distribution of Rubidium, Strontium, and Zirconium in Tuff From Two Deep Coreholes at Yucca Mountain, Nevada
Variations in concentrations of trace elements Rb, Sr, and Zr within the sequence of high-silica tuff and dacitic lava beneath Yucca Mountain reflect both primary composition and secondary...

Scenario Evolution: Interaction Between Event Tree Construction and Numerical Analyses
Construction of well-posed scenarios for the range of conditions possible at any proposed repository site is a critical first step to assessing total system performance. Event tree construction...

A Formalism to Generate Probability Distributions for Performance-Assessment Modeling
A formalism is presented for generating probability distributions of parameters used in performance-assessment modeling. The formalism is used when data are either sparse or nonexistent....

Three-Dimensional Thermal Analysis for Temperature Distribution in Geological Formation
A three-dimensional conduction heat transfer program has been developed for use on microcomputer for thermal analysis of a conductive medium subject to, finite length heat sources. The...

System Analysis Dual-Purpose Repository New Results of Temperature Calculations
As design concept for a high-level waste (HLW) final repository the emplacement of reprocessing wastes and spent fuel elements of different types in a common repository is being studied...

Interim Storage of Solidified High Level Wastes
Indian approach to the problem of interim storage of vitrified high level wastes, indicating design philosophy adopted for air cooled vault at Tarapur has been described. Important design...

Interim Waste Storage for the Integral Fast Reactor Fuel Cycle Demonstration
An interim storage system design and operating strategy were developed for implementation in the Integral Fast Reactor Fuel Cycle Demonstration. Waste characteristics and thermal power...

Uncertainty Analysis of Preclosure Accident Doses for the Yucca Mountain Repository
This study presents a generic methodology that can be used to evaluate the uncertainty in the calculated accidental offsite doses at the Yucca Mountain repository during the preclosure...

A Decision Support System for Performance-Based Site Characterization
The complex and dynamic requirements of site characterization present a major management challenge. ParaTrac, a regulatory and technical information system, is described as a valuable...

Knowledge Representation for Bridge Design
An implementation of a frame-based knowledge representation language (KRL) for development of expert system applications in highway bridge design is presented. The frame-based KRL is used...

 

 

 

 

Return to search