Rheological Properties of Simulated Debris Flows in the Laboratory Environment
Steady debris flows with or without a snout are simulated in a 'conveyor-belt' flume using dry glass spheres of a uniform size, 5 or 14 mm in diameter, and their...
Experimental Study on the Rheologic Behavior of the Slurry of Viscous Debris Flow
The slurry of viscous debris flow is a kind of dense solid-liquid mixture. It has very complicated rheologic behavior. As shown in the experiment described in this paper, the slurry exhibits...
Unsteady Flow of Bingham Viscoplastic Material in an Open Channel
An analytic solution for transient flow of a Bingham viscoplastic material in an open channel is presented. The solution for the response to a time-varying pressure gradient predicts shear...
Riprap Stability Results from Large Test Channel
Velocity data from a large test channel were used to determine the distribution of depth-averaged velocity and shear stress on the side slope of both straight and curved channels. From...
Pressure and Stress Distributions Due to a Submerged Impinging Jet
This investigation examines the pressure and shear stress distribution at a smooth planar boundary in the impingement region of a submerged vertical jet in water. The mean pressure and...
Secondary-Flow Correction for Depth-Averaged Numerical Models
An empirical equation is proposed for the production and transport of secondary (streamwise) vorticity induced by lateral curvature in shallow water. The streamwise vorticity creates a...
Application of Weakly Compressible Flow Method to 2-D Open Channel Flows
The depth averaged equations for open channel flows are shown to be similar to that of the weakly compressible flows. The finite volume scheme developed for weakly compressible flows has...
Geomorphic and Sedimentologic Evaluation of a Proposed Flood Control Project, Truckee River, Reno, Nevada
Geomorphic observations, sediment data and shear stress analyses were integrated to evaluate the potential responses of the steep, coarse grained Truckee River to a proposed flood control...
Instability of Water-Fluid Mud Interface
Erosion and entrainment of fluid mud are treated by means of shear flow analysis. The water-fluid mud system is considered as a layered system of two continua separated by a distinct interface...
Shear Properties of Pultruded Glass FRP Materials
The in-plane shear modulus and the in-plane shear strength of a variety of pultruded glass fiber reinforced plastic (FRP) materials were measured experimentally in a pilot test program...
Stratified Flows
This volume contains the edited and refereed proceedings of the Third International Symposium on Stratified Flows, convened on February 3-5, 1987 in Pasadena, California. It consists of...
Form Follows Geometry
The $107 million NCNB Plaza in Tamps, Fla. consists of a 32 floor, 500,000 sq ft, 455 ft tall office tower; a 40,000 sq ft, 78 ft tall banking hall, and a 280,000 sq ft parking garage...
Progress in Hydromechanics
The historical development of hydromechanics in the fifty years since the founding of the Hydraulics Division is reviewed. Rouse's 1938 text, Fluid Mechanics for Hydraulic Engineers, provided...
Buckling Design of Vierendeel Reticular Shells
Double layer reticular shell structures carry very little transverse shear, thus, it may be appropriate to substitute the inter-layer diagonal members with 'space'...
Behavior of Cold-Formed Steel-Concrete Composite Beams
An experimental investigation was conducted at California State University - Long Beach to study the structural behavior of composite beams made of thin-walled cold-formed steel stiffened...
Tripping and Strength of Asymmetrical Plate Stiffeners
Tripping (lateral-torsional buckling) of symmetrical or asymmetrical plate stiffeners can be analyzed by using differential equations or energy formulation. An analytical study is reported...
Stress Computations for Nearly Incompressible Materials
Computation of stresses by the finite element method (FEM) in the case of nearly incompressible isotropic elastic materials is discussed. It is shown that for moderately high Poisson's...
Flexural and Shear Moduli of FRP Beams
The analysis and design of structures of pultruded fiber reinforced plastic (FRP), constant cross-section, commercially produced, beams is discussed in the context of a shear deformation...
Ultimate Strength and Deformation of RC Panels
In this study, twenty reinforced concrete panels have been tested under pure shear. Test results showed that the compressive strength of concrete strut was strongly affected by bond characteristics...
Analytical Model for RC Panels Under Cyclic Load
There are several existing constitutive laws for cracked concrete and steel in RC developed in Okamura laboratory. These models have been developed and verified through reversed uniaxial...
Return to search