ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Pressure and Stress Distributions Due to a Submerged Impinging Jet
This investigation examines the pressure and shear stress distribution at a smooth planar boundary in the impingement region of a submerged vertical jet in water. The mean pressure and...

Secondary-Flow Correction for Depth-Averaged Numerical Models
An empirical equation is proposed for the production and transport of secondary (streamwise) vorticity induced by lateral curvature in shallow water. The streamwise vorticity creates a...

Application of Weakly Compressible Flow Method to 2-D Open Channel Flows
The depth averaged equations for open channel flows are shown to be similar to that of the weakly compressible flows. The finite volume scheme developed for weakly compressible flows has...

Geomorphic and Sedimentologic Evaluation of a Proposed Flood Control Project, Truckee River, Reno, Nevada
Geomorphic observations, sediment data and shear stress analyses were integrated to evaluate the potential responses of the steep, coarse grained Truckee River to a proposed flood control...

Instability of Water-Fluid Mud Interface
Erosion and entrainment of fluid mud are treated by means of shear flow analysis. The water-fluid mud system is considered as a layered system of two continua separated by a distinct interface...

Shear Properties of Pultruded Glass FRP Materials
The in-plane shear modulus and the in-plane shear strength of a variety of pultruded glass fiber reinforced plastic (FRP) materials were measured experimentally in a pilot test program...

Stratified Flows
This volume contains the edited and refereed proceedings of the Third International Symposium on Stratified Flows, convened on February 3-5, 1987 in Pasadena, California. It consists of...

Form Follows Geometry
The $107 million NCNB Plaza in Tamps, Fla. consists of a 32 floor, 500,000 sq ft, 455 ft tall office tower; a 40,000 sq ft, 78 ft tall banking hall, and a 280,000 sq ft parking garage...

Progress in Hydromechanics
The historical development of hydromechanics in the fifty years since the founding of the Hydraulics Division is reviewed. Rouse's 1938 text, Fluid Mechanics for Hydraulic Engineers, provided...

Buckling Design of Vierendeel Reticular Shells
Double layer reticular shell structures carry very little transverse shear, thus, it may be appropriate to substitute the inter-layer diagonal members with 'space'...

Behavior of Cold-Formed Steel-Concrete Composite Beams
An experimental investigation was conducted at California State University - Long Beach to study the structural behavior of composite beams made of thin-walled cold-formed steel stiffened...

Stress Computations for Nearly Incompressible Materials
Computation of stresses by the finite element method (FEM) in the case of nearly incompressible isotropic elastic materials is discussed. It is shown that for moderately high Poisson's...

Flexural and Shear Moduli of FRP Beams
The analysis and design of structures of pultruded fiber reinforced plastic (FRP), constant cross-section, commercially produced, beams is discussed in the context of a shear deformation...

Ultimate Strength and Deformation of RC Panels
In this study, twenty reinforced concrete panels have been tested under pure shear. Test results showed that the compressive strength of concrete strut was strongly affected by bond characteristics...

Analytical Model for RC Panels Under Cyclic Load
There are several existing constitutive laws for cracked concrete and steel in RC developed in Okamura laboratory. These models have been developed and verified through reversed uniaxial...

Lateral Force Distribution in Manufactured Housing from Full-Scale Testing
The research focused on the behavior of two manufactured 14 ? 66 ft houses under simulated wind loads. Extensive instrumentation was employed to insure the collection of data that would...

Panel-Sheathed Shear Walls ? Past and Future
In order for a building to resist the lateral forces caused by wind or earthquake, it is necessary that the building include a lateral force resisting system. When the walls are designed...

Lessons Learned from Dynamic Tests of Shear Panels
Thirteen 8-ft by 8-ft shear panels and fifteen 16-in by 18-in shear panels were tested dynamically at the Structural Testing Laboratory, Richmond Field Station, University of California,...

A Structural Analysis Model for Timber Shear Walls
A numerical modelling procedure for the non-linear analysis of timber shear walls is presented. The model includes the non-linear behavior of the connectors between the sheathing and framing,...

Shear Strength of P.P.C. Beams
50 beams of partially prestressed concrete were tested and 82 data of the ultimate shear-strength were obtained. Based on these results, this paper studies the effects of the degree of...

 

 

 

 

Return to search