Review of Garolim Tidal Power Project
The feasibility study of Garolim tidal power project made in 1981 was reviewed in 1986 and updated in 1988. The review study generally confirmed the result of the 1981 study. The generator...
The Development of Tidal Resources in China: The Tidal Experimental Station of Jiangxia and Its No. 1 and No. 2 Bidirectional Tidal Water Turbine
This article outlines the development and use of tidal energy, specifically, the exploitable tidal energy and the situation of its use in China and introduces the first large bidirectional...
Tidal Power Plants - The Source of Ecologically Clean Energy
This paper outlines the development of tidal energy within the Soviet Union (U.S.S.R.). It describes several working and proposed tidal power plants developed in the U.S.S.R. with a discussion...
Estimation of Wave Power as an Energy Resource for Hawaii
One of the most important elements in determining the wave power available by means of a wave power extracting device is the amount of wave energy present at a given location during a...
Power Conditioning Options for Variable-Speed Ocean Energy Conversion Systems
As part of a recent wave energy feasibility study for the coast of North Carolina (SEASUN Power Systems, 1988), a survey was conducted of power conditioning and transmission technology....
Pre-Experiments of OTEC Experimental Facility for Ocean-Based Mariculture-OTEC Pilot Plant Houyou
The ocean-based mariculture-OTEC pilot plant 'HOUYOU' was completed in March, 1989 and the at-sea test in Toyama Bay was carried out from July 18th until September...
OTEC's subsurface discharges of Deep Ocean Water: Modelling Their Effects on the Primary Production
The French project of a shore-based OTEC pilot plant (5 MW) at Tahiti gave the opportunity of simulating the ecological effects of a small, man-made upwelling in coastal-tropical oligotrophic...
A 250 KW Closed Cycle Land Based Ocean Thermal Energy Plant
The paper describes the design of a 250 KW land based closed cycle Ocean Thermal Energy Plant suitable for installing at Keahole Point in Hawaii. The work is being done for ALCAN International....
Overview: Steam-Water Phase Change in OTEC Systems
This paper presents an overview of the thermodynamics and the heat and mass transfer processes occurring in OTEC systems utilizing seawater as the working fluid....
Seawater Experimental Results of Direct-Contact Condensation for OC-OTEC Applications
Tests of a direct-contact condenser (DCC) for open-cycle ocean thermal energy conversion systems (OC-OTEC) have been conducted using seawater and exchanging up to 1.25 MWth...
Noncondensable Gas Composition and Outgassing Rates in the Open-Cycle OTEC System with Direct-Contact Condensation
This paper will present the results of recent measurements of noncondensable release from an open-cycle ocean thermal energy conversion (OC-OTEC) system in a direct-contact condensation...
De-Aeration and Re-Injection of Noncondensable Gases in Open-Cycle OTEC
Non-condensable gas exchange characteristics in seawater and fresh water are compared and contrasted. The higher rate of exchange observed for these gases in seawater is incorporated in...
Carbon Dioxide Release from OTEC Cycles
This paper presents the results of recent measurements of CO2 release from an open-cycle ocean thermal energy conversion (OC-OTEC) experiment. Based...
Large Stone Hot Mix Asphalt: State of the Art
Improved mix characteristics can be achieved by utilizing existing well-known technologies. Developments have included: more attention to voids in mineral aggregate criteria; adjusting...
Improved Prediction of Masonry Durability Through Advanced Materials Science Methods
Several trends in the use of materials in civil engineering have made it imperative to improve the ability to predict the durability of masonry. This will require more emphasis on materials...
Premature Failures of Outdoor Masonry Pavements
The authors have investigated and repaired a number of premature inservice failures of masonry paving systems in recent years. These systems have become common, built over underground...
Performance of Latex-Modified Thin-Set Mortars in Applications of Thin-Brick Veneer
The use of field-applied polymer-modified mortars for adhering thin brick or tile to building exteriors has become increasingly common in the last decade. The latex-modified mortars can...
Are ASTM Standards Enough?
ASTM (American Society for Testing and Materials) is most likely the World's most renown developer of voluntary consensus standards. Its standards development process utilizes...
Three Tools for Design Test Bed Analysis
Three analytical tools are outlined for use in design test bed work focusing on the design/production interface. The tools are substitution analysis, coupling analysis, and value chain...
Montana's Approach to Reduce Asphalt Pavement Rutting
The Montana Department of Highways experienced premature rutting in some asphalt concrete pavements primarily on the east-west interstate in Eastern Montana. Montana participated with...
Return to search