Reconstruction Under Traffic: A Study of Some Effects of the Dan Ryan Project on Motor Carrier Operations in Northeast Illinois
The paper discusses preparations by the Chicago Area Transportation Study for a study of the operational responses of truckers to whatever effects upon the regional highway system are...
Assessing the Role of Regulation in Urban Goods Movement
While economic regulation per se is becoming virtually non-existant, other forms of regulations which result in finite and measurable economic impacts continue on -- and indeed are proliferating....
Dallas Urban Goods Movement Changes-The Decade After
In the 1970's, the City of Dallas undertook an urban goods movement (UGM) planning project that resulted by the end of the decade in far reaching changes in the process, particularly...
Economic Impact of Alternative Downtown UGM Strategies
In downtown Dallas, four strategies have been tested: consolidated public truck terminals; provision of off-street loading space in individual buildings, under ordinance; curb space management...
Land Use Implication of Urban Intermodal Operations
In order to efficiently handle freight in an urban/suburban environment requires a working combination of roads and facilities, both of which consume land. Land in turn is one of the most...
Moving Intermodal Containers Over Urban/Suburban Highways
Due to standardization, to date most containers basically fit the U.S. highway environment, which was the entire original intent of intermodal transport. The paper presentes the results...
Information Needs for Policy, Planning and Design
This resource paper was presented specifically as a focus of discussion for probe group II, Information Needs for Policy, Planning and Design. The paper represents the freight planning...
Truck Involvement in Fatal Urban Road Accidents in Australia
Trucks are over-represented (relative to vehicle numbers and vehicle-kilometers of travel) in fatal accidents. Those most at risk are occupants of other vehicles and pedestrians. Articulated...
Fired Up at Fort Drum
The U.S. Army's first major privatization contract was signed for design, construction, operation and ownership of the Fort Drum powerplant at the newly constructed base for...
Transmission Line Insulator Assembly Reliability
Transmission line insulator assemblies made up of ceramic or composite insulators and associated hardware are used to mechanically support and electrically isolate energized conductors...
Repair and Rehabilitation of Damaged Steel Flexural Members
In earlier years, the primary method for repairing steel flexural members was to replace the member. However, with the cost of labor and material increasing dramatically over the last...
The Fabrication and Erection of the Minneapolis Convention Center
A new convention center is part of the City of Minneapolis' successful plan to maintain an economically strong downtown core. It is the latest addition to a list of civic...
New Outlines for 500 kV Transmission Towers Using Cold-Formed Shapes: The Experimental Line of the American Electric Power Research Institute
The use of cold-formed steel members, in electrical transmission towers, is actually a feasible, reliable and economical solution. The EPRI experimental line is an example of the newest...
Double Angle Bracing Members
It has been pointed out that when a single line of bracing is used, the member is usually made from structural tubing. It has been suggested that when the loads are not too great, consideration...
Preliminary Design Considerations for Flat Deployable Structures
Deployable structures are prefabricated frames that can be stored in a compact configuration, and can be easily deployed into a large-span, load-bearing space structure. The interest in...
Some Examples of Latticed Structures in Spain
Since the middle of the last sixties latticed structures have extensively been used in Spain to cover different large areas as factories, churches, marketplaces, exhibition palaces etc....
Analysis of Tapered and Stepped Columns by Analogy to Cantilever Deflection
An analysis is developed for handling the buckling design of tapered and stepped columns with the aid of the so called 'amplification factors'. When these factors...
Design Issues in Steel Buildings
The Committee on Design of Steel Building Structures of the Committee on Metals of the Structural Division of ASCE was formed in 1981, with the express purpose of studying problems that...
Steel Girt Design
Procedures are presented for the design of light gage cold formed girts and hot rolled girts. The effects of continuity, sag rods, and wall sheeting are discussed. Design procedures are...
Behavior of Cold-Formed Steel-Concrete Composite Beams
An experimental investigation was conducted at California State University - Long Beach to study the structural behavior of composite beams made of thin-walled cold-formed steel stiffened...
Return to search