Large Scale Testing Facility for the Evaluation of Structural Systems Under Critical Loads
The Charles Lee Powell Structural Systems Laboratory at the University of California, San Diego, provides, with a 50 ft. high reaction strong wall and a 120 multiplied by 50 ft. box girder...
Blasting Densifies Sand
Constructing the Jebba Dam on Nigeria's Niger River required in-place densification of large volumes of loose sand to record depths of up to 131 ft. Vibrocompaction was used...
Berth 5-6 Pavement Performance: Port of Oaklan
In 1978 the Port of Oakland commenced a project to demolish the old Berth 5, 6 & 7 break bulk sheds, portions of the wharves, and the warehouses behind, and to construct container...
Port of Long Beach Supertanker Terminal
The supertanker marine terminal and crude-oil transfer facility at Berth 121 on Pier E in the Port of Long Beach, California is the largest tanker-handling berth on the West Coast. This...
Systematic Design of Marinas for Ice Condtions
A systematic approach and recommendations are presented for design engineers use in planning and building safe docks and marinas, and in reducing the expense of damages which ice causes....
Los Angeles and Long Beach Harbors Tidal Circulation Study
Expansion of harbor facilities frequently involves placement of additional landfill and the deepening of channels and mooring areas. A numerical tidal circulation model was used in the...
Marginal Wharf and Embankments?Seismic Design
This paper presents some of the seismic considerations used for the improvements at Berths 225 to 229 at the Port of Los Angeles. The design of the improvements was complicated by the...
Treating Sewage in One Tank
A sequencing batch reactor (SBR) was the answer to a sewage problem that was holding up community development in Poolesville, MD. Poolesville was one of the first municipalities in the...
Use of In Situ Tests for Foundation Design on Clay
Years of evaluated experience with the field vane test in soft clays have resulted in empirical correction factors well suited for design practice. An extension of L. Bjerrum's...
Use of SPT and CPT Tests for Evaluating the Liquefaction Resistance of Sands
A cone penetration test (CPT)-liquefaction resistance relationship has been established using the large body of standard penetration test (SPT) data. Factors for relating CPT tip resistance...
Laboratory and Field Evaluation of Cone Penetrometers
Cone penetrometers from 8 organizations have been studied by performing laboratory tests and field tests. The testing show that pore pressure and temperature zero shift affect significantly...
Effect of Cementation on the Cone Penetration Resistance of Sand
A laboratory study was conducted to investigate the effect of cementation on the cone penetration resistance of sand. A new apparatus to form homogeneous artificially cemented sand specimens...
In-Place Permeability Measurement of Slurry Trench Cutoff Walls
A suggested procedure for the in-place measurement of slurry trench cutoff wall permeability is presented. The H. Bouwer and Rice method, employing a single observation well and variable-head...
Slow Rate Sand Filtration Using a Zeolite Surface Amendment
The objective of the study was to obtain detailed information regarding amended filter performance at surface loading rates 2 to 4 times higher than standard flow rates. Experiments were...
Models of Organics Transport Through Soil Columns
A mathematical model is proposed for the transfer of organic solutes in soil. Two cases are considered namely transport of non-adsorptive solutes and transport of adsorptive solutes. Comparative-study...
Modeling the Movement of Volatile Organic Chemicals with Unsaturated Flow
Over the past decade, the rate of groundwater contamination by volatile organic chemicals (VOCs) has increased. Therefore, for both groundwater protection and cleanup, it is necessary...
Modeling Dispersion in Non-Homogenous Formations
A stochastic model of contaminant mixing in non-homogeneous porous media has been developed. The model is three dimensional and relates the contaminant distribution to the probability...
Data from Most Monitoring Wells in Limestone Terranes Are Irrelevant to Pollutant Detection but Reliable Monitoring Can Be Attained: Why and How
The conventional system of using three or more monitoring wells placed down-gradient from a site and one or more background wells placed up-gradient from it is extremely unlikely to detect...
Effect of Particle Size on Sludge Dewaterability
Using a modified Buchner funnel apparatus to measure specific resistance and a sequential centrifugation/filtration procedure to fractionate a sludge, it was possible to more precisely...
Viscoplastic Fluid Model for Debris Flow Routing
This paper describes how a generalized viscoplastic fluid model, which was developed based on non-Newtonian fluid mechanics, can be successfully applied to routing a debris flow down a...
Return to search