Undrained Cyclic Behaviour of Beaufort Sea Silt
Cyclic loading behaviour of Beaufort Sea silt has been studied under triaxial conditions, with and without static shear stress, to define the resistance to liquefaction or cyclic straining...
Cyclic Multiaxial Cubical Cell Experiments on a Norton Sound Silt
A servo-controlled multiaxial cubical test apparatus has recently been used to investigate the behavior of the foundation soil for a gravity structure in Norton Sound of the Alaska Outer...
Analysis of Liquefaction Potential of Hydraulically Placed Subsea Berms
The use of hydraulically placed sand for the construction of artificial islands for hydrocarbon exploration in the Beaufort Sea has necessitated detailed geotechnical evaluations of their...
Creep Rate Analysis of Pile Load Test Data
The uniform creep behavior of five driven piles and one slurried pile based on pile load test data are presented and analyzed. The incremental static load tests carried out by ARCO, Alaska...
Earth Pressure on Underground Concrete Pipe in a Field Test
The cause of cracking at the sheetpile extraction in concrete pipes buried by the open excavation method was investigated by loading tests on the pipe and a field test carried out by Osaka...
Negatively Buoyant Flow in a Diverging Channel
Negatively buoyant (plunging) flow from a horizontal, constant width channel into a diverging channel has been studied in the laboratory. The study was undertaken to provide information...
Initial Operation Model for the Central Arizona Project
A microcomputer program for operating uncompleted portions of the Central Arizona Project has been developed. Engineers may use this program daily to assist in scheduling pumping plant...
Structural Retrofit for Nuclear Power Plants
Retrofitting of nuclear power plants is a major concern these days. Recent rulings of regulatory agencies have affected most of the generating plants in some way. The lessons learned from...
Making Treatment Plants Work
For the most part, past design criteria that have been used were based primarily on historical information from plants that worked or general rule of thumb criteria. With the increasing...
Evaluation of Structures by Dynamic Load Testing
The Frequency Sweep Method for the evaluation of structures by dynamic load testing was developed by the senior author. It is a non-destructive testing (NDT) method that was originally...
Loads Due to Human Movements
The live loads due to human actions are random functions being modeled from data obtained from tests to determine load histories for the actions of individuals and small groups of people...
Seismic Probabilistic Risk Assessment for Critical Facilities
Probabilistic Risk Assessment (PRA) for seismic events is currently being performed for nuclear power plants. The background on seismic PRA is presented along with a basic description...
Bridge Inspection by Dynamic Loading Technique
This paper describes, a case study of the evaluation of the structural integrity of a New York State Thruway bridge using the dynamic loading technique. The study was undertaken in a effort...
Seismic CPT to Measure In-Situ Shear Wave Velocity
A new test, called the seismic cone penetration test (SCPT) is described. A small rugged velocity seismometer has been incorporated into an electronic cone penetrometer. The combination...
Standards for Pile Load Tests in Permafrost
A requirement exists to establish standard procedures for conducting pile load tests in permanently frozen soils. The methods outlined in the ASTM Standards for piles in thawed soils do...
Attenuating Creep of Piles in Frozen Soils
Results of several long-term creep tests of piles in frozen soils are analyzed; the primary or attenuating creep is predominant in most cases. For effective design of pile foundations...
Creep of a Strip Footing on Ice-Rich Permafrost
Creep settlement tests were performed on a strip footing founded on the surface of ice-rich aeolian silt permafrost. The tests consisted of applying four step loadings to a 10 in. (25....
Installation of Category I Caissons
Founding a proposed safety-related Category I structure of a nuclear power plant on rock socketed caissons necessitated using precision installation techniques. These techniques were chosen...
Case Histories: Evaluation of Drilled Pier Integrity by the Stress Wave Propagation Method
The Stress Wave Propagation Method (SWPM) was used to nondestructively investigate the integrity of straight-shaft drilled pier foundations at two sites in the Denver, Colorado area. Drilled...
Behavior of Drilled Piers in Layered Soils on Texas Barrier Islands
Twenty-eight full scale load tests and the results of 41 geotechnical studies were analyzed to correlate shear strength interpreted from field and laboratory test data with those derived...
Return to search