Toward Linking Demographic and Economic Models for Impact Assessment
One of the objectives of the Yucca Mountain Project, in Southern Nevada, is to evaluate the effects of the development of a high-level nuclear waste repository. As described in the Section...
Forecasting Behavioral Response to a Repository from Stated Intent Data
To forecast repository-induced behavior from surveys of behavioral intention, we develop a model of the relation between stated intent and actual propensity. This model relies heavily...
Circuitous Routings: Integration of Public Acceptability with Technical and Economic Feasibility
Public acceptance of agency plans for shipment of radioactive wastes to disposal facilities may be critical to efforts to site geologic repositories. Local and state participation in route...
Payments-Equal-to-Taxes (PETT): An Interpretation of Sections 116(c) (3) and 118(b) (4) of The Nuclear Waste Policy Act of 1982, as Amended
The opinions expressed in this paper are those of the authors and not necessarily those of either the U.S. Department of Energy or of Deloitte & Touche. The Payments-Equal-To-Taxes...
Some Political Logistics of Nuclear Waste
The need for a centralized, federal, interim storage facility for nuclear waste, or MRS, alledgedly has become more urgent because the date for the opening of the permanent repository...
The MD Design?A Cool Concept for Geologic Disposal of Radioactive Waste
The scheduled disposal capacity for spent nuclear fuel and other high-level radioactive wastes (HLW) is inadequate and the estimated supply of recoverable uranium for continued nuclear...
Emplacement Drift Temperature Reduction by Cooling Enhancement and Ventilation
The application of cooling enhancement in a short vertical container emplacement layout is analyzed. Two 25 m-long heat pipes upward oriented at 45 degrees are installed at each emplacement...
Three-Dimensional Thermal Analysis for Temperature Distribution in Geological Formation
A three-dimensional conduction heat transfer program has been developed for use on microcomputer for thermal analysis of a conductive medium subject to, finite length heat sources. The...
The Constructive Use of Heat in an Unsaturated Tuff Repository
By designing the engineered barrier system in an unsaturated tuff repository to constructively use heat, the waste containers can be kept dry for hundreds of years. Without water, the...
System Analysis Dual-Purpose Repository New Results of Temperature Calculations
As design concept for a high-level waste (HLW) final repository the emplacement of reprocessing wastes and spent fuel elements of different types in a common repository is being studied...
The Technical Challenge of Mechanized Excavation for Nuclear Waste Repositories
The requirements of mechanized tunnelling and shafting techniques within this newly developing field, namely the excavation of Nuclear Waste Repositories, will challenge the designers...
Recent Development in the Design of Hard Rock Tunnel Boring Machines for the Mining Industry
Underground development for nuclear waste storage will possibly require tunnels to be excavated in a variety of rock conditions and configurations. Recent innovations in Tunnel Boring...
Shaft Boring Machine?A Method of Mechanized Vertical Shaft Excavation
The Shaft Boring Machine (SBM) is a vertical application of proven rock boring technology. The machine applies a rotating cutter wheel with disk cutters for shaft excavation. The wheel...
Mechanical Tunnel Excavation in Welded Tuff
The Technical Review Board for the United States high-level radioactive waste facility at Yucca Mountain has recommended maximum use of 'the most modern mechanical excavation...
A First Look at Roadheader Construction and Estimating Techniques for Site Characterization at Yucca Mountain, Nevada
The Yucca Mountain site characterization program will be based on mechanical excavation techniques for the mined repository construction and development. Tunnel Boring Machines (TBM's),...
Design, Selection, and Application of Disc Cutters in Hard and Abrasive Rock
Disc cutters have been used on tunnel boring and shaft boring machines for many years and are a proven method to bore hard rock. This paper will study the important parameters which effect...
Dry Spent Fuel Storage in the 1990's
In the United States, for the decade of the 1990's, at-reactor-site dry spent fuel storage has become the predominant option outside of reactor spent fuel pools. This development...
Evaluation of Storage/Transportation Options to Support Criteria Development for the Phase I MRS
The Department of Energy's (DOE) Office of Civilian Waste Management (OCRWM) plans to develop an interim storage facility to enable acceptance of spent fuel in 1998. It is...
Interim Storage of Solidified High Level Wastes
Indian approach to the problem of interim storage of vitrified high level wastes, indicating design philosophy adopted for air cooled vault at Tarapur has been described. Important design...
Interim Waste Storage for the Integral Fast Reactor Fuel Cycle Demonstration
An interim storage system design and operating strategy were developed for implementation in the Integral Fast Reactor Fuel Cycle Demonstration. Waste characteristics and thermal power...
Return to search