Comparison of Some Importance Sampling Techniques in Structural Reliability
The approximate calculation of structural reliabilities by FORM/SORM is well known. Nevertheless, alternatives or at least methods with which the error by these methods can be quantified...
Use of Importance Sampling Constraints in System Optimization
An important application of system reliability analysis is to incorporate overall system risk as a constraint in a structural optimization. The paper describes the use of Monte Carlo Importance...
Variability Response Functions and Stochastic Field Discretization in Stochastic Finite Element Methods
Stochastic systems whose mechanical properties vary spatially are investigated in the present paper. The stochastic response variability of the systems is characterized by means of the...
Updating of Dynamic Structural Systems by Learning
Many techniques have been developed to identify structural system parameters; however, they are generally restricted to parameter identification within the framework of an equivalent structure...
Dynamic Response of Uncertain Two-Dimensional Structures
A concept for the reliability analysis of structures with uncertain elastic and mass properties is presented. Its applicability is shown by means of a numerical example. The results are...
On the Approximated Solution of Non-Linear Systems Under Non Gaussian Excitations
The study of non-linear mechanical and structural systems under random excitations has become very important in the last years. When random excitations are Gaussian, many approaches can...
Random Vibration of the Viscoelastic Structure under Series of Stochastic Excitations
In the paper the vibration of viscoelastic single-degree-of-freedom system caused by a random series of pulses is considered. The linear rheological model for the creep law is assumed....
Probabilistic Evaluation of Redundancy of Bridge Structures
Redundancy of bridge structures and methods to evaluate redundancy are reviewed in this paper. A method to measure redundancy based on the existing theories of probability as related to...
Incorporating Corrosion in Reliability-Based Design of Anchored Bulkheads
Corrosion of steel is an important factor in the design of marine structures. A reliability analysis of anchored bulkheads showed that corrosion changes the critical failure mode from...
Pre-Envelope Covariance Differential Equations
The problem of predicting the safety of structural systems subjected to random loading arises in may engineering applications. In this framework the envelope process plays an important...
Surface Motion Due to Stochastic Plane Sources in a Layered Medium
To simulate the ground motion in the near field, a seismic fault is modeled as a two-strip plane. The width of each strip is so thin that the rupture process of the strip can be described...
In-Plane Non-Linear Random Vibration of Composite Plates
Filamentary composite structural components used in engineering applications are usually subjected to stochastic loads. Composites have strongly anisotropic properties and display significantly...
Linear System Spectral Moments Determination
The stationary response of a linear system to random excitation is considered. A previously developed approach is extended to be applicable for the determination of both even and odd order...
Probabilistic Characteristics of a Sliding Structure Via New Stochastic Linearization Methods
New, non-classical stochastic linearization techniques are applied to solve the titled problem. Two alternative criteria, suggested by X. Zhang and I. Elishakoff, respectively, are evaluated....
Reliability Consideration in Shakedown Analysis
Shakedown analysis for ductile rigid frames has shown that a structure can respond linearly at a higher elastic limit after it has experienced some plastic deformation. If the residual...
Parameter Estimations of Structural Dynamic Systems
In this paper, time-domain methods for estimating the system parameters and the modal properties of linear structural dynamic systems are studied. The autoregressive and moving average...
Evaluation of Expansive Clay Soils in Tucson, Arizona
Research was conducted to investigate the mineralogy, engineering properties, and regional distribution of expansive clay soils in Tucson, Arizona. Data derived from X-ray diffraction...
Geotechnical Database Manipulation to Effect Stochastic Analysis
Existing or easily-developed databases of regional geotechnical information can be used to estimate prior probability distributions and parameters for use in stochastic analyses. Prior...
Critical Issues Related to a Combined Probabilistic Numerical Analysis of Contaminant Transport in Porous Media
Reliability algorithms provide attractive alternatives to Monte Carlo simulation and stochastic perturbation approaches for probabilistic analysis of contaminant transport in porous media....
A Criticism of Statistical Methods in Probabilistic Models in Structural Reliability
The usual statistical models, classical and Bayesian, are not well suited for problems of structural reliability, since here we have rarely as assumed for these models a sequence of identical...
Return to search