Feasibility of FRP Molded Grating-Concrete Composites for One-Way Slab Systems
This paper describes the behavior of one-way concrete slabs reinforced with Fiberglass Reinforced Plastic (FRP) molded grating. FRP molded grating is commercially available and is mainly...
The Superposition Approach to Pile Group Dynamics
A general three-dimensional boundary integral formulation for pile groups is used to obtain a set of dynamic interaction factors for a number of soil profiles and for a wide range of pile...
Dynamic Parameters Analysis of Piles
This paper presents an analysis for the dynamic parameters of a single pile. The analysis allows consideration of pile-soil interaction, soil natural layered behavior and floating pile...
A Numerical Study of Kinematics of Nonlinear Water Waves in Three Dimensions
We present a new method for analyzing the kinematics of nonlinear water waves in a three-dimensional domain. This method is based on our extension and generalization of the mixed-Eulerian-Lagrangian...
Cyclic Behavior of a Deepwater Normally Consolidated Clay
A comprehensive advanced laboratory testing program was undertaken to study the cyclic behavior of clays under various combinations of one-way and two-way cyclic loading. This work was...
Dynamic Response Characteristics of Jack-Up Drilling Units
The effects of five parameters on the dynamic amplification of the global base shear on a deep water jack-up drilling unit were analyzed using a time domain nonlinear model. The five parameters...
A Laboratory Study of Shock Waves in Frozen Soil
This work has focused on two aspects of dynamic behavior of frozen soil: first, on the shock pressure attenuation, and second, on the shock Hugoniot. The use of long bars of frozen soil...
Friction and Cohesion in Ice Rubble Reviewed
An argument is ventured that accumulations of ice rubble undergoing continuous shear deformation are essentially cohesionless. In terms of the Mohr-Coulomb failure criterion, therefore,...
Low-Rise Shear Wall Failure Modes
A summary of the data that are available concerning the structural response of low-rise shear walls is presented. These data will be used to address two failure modes associated with shear...
Structural Approximations in Multi-Story Buildings
Simplified computer analyses and various approximate hand calculation methods are extremely valuable in structural engineering for multi-story buildings both during the preliminary design...
The Boundary Element Method in Engineering Practice
The boundary element method (BEM) provides an excellent basis for the development of integrated design and analysis systems. The technique possesses the advantages of simple model generation,...
Strain Distribution in Fault Zones and Fluid Flow
Field and laboratory studies have shown that mechanical shearing in fault zones produces a repeatable fabric that changes with increasing shear strain. In the brittle field of mechanical...
Correlation of Hydraulic Conductivity and Sonic Velocity in Water-Saturated Tuff
A laboratory study was conducted to investigate the correlation of hydraulic and sonic properties of water-saturated tuff. The hydraulic test used a new rock block testing machine, which...
Boundary Integral Methods for Unsaturated Flow
A boundary integral equation method (BIEM) is described for numerical analysis of quasilinear steady unsaturated flow in homogeneous material. The applicability of the exponential model...
Macro-Model for Inelastic Low-Rise R.C. Shear Walls
This paper presents an analytical technique for calculating static and seismic response of low-rise shear wall structures. The displacement response is resulting from bending, shear, and...
Finite Element Analysis and Design of Plywood Shear Walls
An integrated procedure for the analysis and design of rectangular plywood shear walls is presented and illustrated. The analysis is done using an in-house finite element program with...
The Boundary Element Method in Engineering Practice
The advances in computer aided engineering has revolutionised many aspects of the engineering design in the last twenty years or so. During this time, design engineers have relied heavily...
Interaction of Elastic Waves with Axisymmetric Cavities in a Half Space: A Combined Finite Element-Boundary Integral Approach
A hybrid numerical method is presented to investigate the interaction of elastic waves with axisymmetric cavities on the surface of a half space. In this method the near field which consists...
Finite Element Studies of Block Shear for Structural Tees
Structural tees are commonly used as tension members. As a first step toward testing the adequacy of the current design codes for net section and block shear failures near the connections...
Prediction of Transverse Shear Stresses for Various Isoparametric Thick and Thin Shell Elements
Utilizing three-dimensional equilibrium equations (often referred to as an Equilibrium Method (EM)), an estimation of transverse stresses for fiber-reinforced laminated doubly curved shells...
Return to search