ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Evolution of Damage in Brazilian Test Using Holographic Interferometry
A common method for estimating the tensile strength of concrete is the Brazilian Test. The test is carried out by loading a cylinder on its side in diametral compression. Accodring to...

Shear Resistance Models for Concrete Bridges
Statistical models are developed for the shear resistance of concrete bridge girders. Two structural types are considered: reinforced concrete T-beams and prestressed concrete AASHTO girders....

An Elastoviscoplastic Model for High Strength Concrete
An elastoviscoplastic model of overstress type is proposed for high-strength concrete in this study. With its viscosity parameters determined with experimental data from the split-Hopkinson-pressure-bar...

Mechanical Properties of High Performance Concretes
This paper presents some of the initial results of a 4-year research project on mechanical properties of high performance concretes with particular reference to highway applications. High...

Fiber Suppressed Localization in Tension
Tensile fracture in portland cement based fiber composites is studied. Formation and propagation of stable microcracks is examined by means of holographic interferometry. Distributed microcracking...

Flexural and Shear Studies of Carbon Fiber Reinforced Beams
This paper presents the results of laboratory test on beams reinforced with three dimensional continuous carbon fiber grid. The grid is prefabricated by three-dimensional weaving and epoxy...

Compressive Strength and Characterization of Failure Modes for Polymer Concrete
The effect of aggregate type, polymer content and specimen dimensions on the compressive strength and failure modes of a polyester polymer concrete (PC) was investigated. Two aggregate...

Constitutive Modeling of Slurry Infiltrated Fiber Concrete (SIFCON)
Slurry Infiltrated Fiber CONcrete (SIFCON) is a unique material, containing 5 to 18 percent, by volume, of steel fibers; in contrast, standard Fiber Reinforced Concrete (FRC) usually contains...

Optimization of Discontinuous Fiber Composites
Discontinuous Random Fiber Reinforced Composites (DRFRC) exhibit different behaviors depending on their microstructural properties. Small fraction of fiber rupture can have a beneficial...

Determination of Interfacial Shear and Normal Stresses in Fiber Pull-Out
In this paper we present an improved formulation for the pullout problem, wherein both the effects of fiber end condition and interfacial and frictional shear stresses are considered....

Microcrack Interaction Toughening in Ceramics and CMCs
The generation of microcracks, which causes an extension of the damage zone at values of stress intensity factor, K, below the expected critical level represented by K_IC...

Stability of Beams in Eccentrically Braced Frames
As the link yields and strain hardens in an eccentrically braced frame, the beam segment-outside of the link is subject to a combination of high axial force and bending moment. For certain...

Stresses in Open Section Fiber Reinforced Composite Beams Under Constant Shear Loading
A strength of materials approach from the ply level is used to derive expressions for stresses in statically determinate open section composite beams subjected to constant shear loading....

Tensile-Integrity Structural Concepts for the Lunar Surface
This paper suggests the use of tension cable structures of a particular type, Tensegrity structures, for a lunar base. Tensegric shells can be a system of bars and cable net. The shell...

Sintering of Lunar Glass and Basalt
Sintering of the regolith has been proposed as a method for producing construction materials from local resources at a lunar base. Applications for lunar 'bricks' include road beds, foundations,...

Strength and Fracture of Glass in the Lunar Environment
Due to the lack of water on the moon, the effects of hydrolytic depolymerization - stress corrosion cracking - will be nonexistent in glasses produced and used on the moon. This would...

Mechanical Properties of Compacted Lunar Simulant Using New Vacuum Triaxial Equipment
Mechanical stress-strain-strength properties of Arizona Lunar Simulant (ALS) are investigated by using a newly developed vacuum triaxial device that allows compaction under different initial...

Explosive Forming of Aluminum-Lithium Alloys
This paper proposes the use of explosive forming to form large, near net shape components for HLLV propellant tanks and structures in meeting this need. Combining with high strength to...

Simple and Efficient Methods to Produce Construction Materials for Lunar and Mars Bases
A microwave heating method and a cold press method are proposed as simple ways to produce construction materials on the Moon and Mars. The present experiment on the microwave heating method...

Denver International Airport Fabric Roof Design
The design of Denver's Landside Terminal Complex for the new Denver International Airport, called for some far reaching vision coupled with imaginative building technologies. Because of...

 

 

 

 

Return to search