ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Determination of Hydraulic Roughness for Concrete-Lined, Supercritical Channels
A channel verification program has been initiated by the US Army Engineer District, Los Angeles to determine the hydraulic roughness of flow in a concrete channel. Specifically, this study...

Variations Encountered in Design Analysis of Local Scour at Drop Structures
Proper design of drop structures can prevent failure due to scour at upstream structures, like bridges. An important aspect of drop-structure design is the prediction of the local scour...

Bed Shear Stress in Unsteady Open-Channel Flows
In this study, velocity distributions over smooth and rough beds were accurately measured with an LDA in unsteady open-channel flows. The log-law distributions yielded well in the wall...

Prediction of Gravel Transport Using Parker's Algorithm
This paper demonstrates that sediment discharge in gravel streams can be reasonably estimated by calibrating the Parker and Klingeman procedure. This paper also identifies the need for...

Advanced HEC-2 Modeling on Forester Creek
The goal of this paper is to share information regarding advanced modelling techniques used to solve complex hydraulic flow issues using the HEC-2 Computer Model (1990). There are several...

A Numerical Model for Learning Concepts of Streamflow Simulation
Numerical models are useful for demonstrating principles of open-channel flow. Such models can allow experimentation with cause-and-effect relations, testing concepts of physics and numerical...

A Comparison Between Two Kinematic Wave Solutions for Movement of Debris Flows
We compare an asymptotic kinematic wave solution for movement of debris flows with a solution obtained by the method of characteristics. The differences between the two solutions in the...

An Optimization Approach to River Adjustments
The adjustment of alluvial channels is presented here as a non-linear optimization problem in which the ideal channel will tend to adopt an optimum configuration subject to the imposed...

Laboratory Study of the Characteristics of Shallow Open Channel Flow Using Fiber-optic Laser Doppler Velocimetry
An experimental study was proposed to investigate the characteristics of shallow rain-impacted flow using a recirculating flume and an artificial rainfall simulator. The fibre-optic Laser...

Investigation of Saltating Particle Motions Using Flow Visualization Technique
A real-time flow visualization technique is applied in this study to investigate these phenomena. This technique is able to measure the particle trajectories and particle velocities without...

Model Study of Rio Hondo Flood Control Channel, Los Angeles, California
The Rio Hondo Flood Control Channel located within the Los Angeles County Drainage Area (LACDA) is part of a Comprehensive flood control system which includes 20 dams, 129 debris basins,...

Bri-Stars Model for Alluvial River Simulation
The Bridge StreamTube Model for Alluvial River Simulation (BRI-STARS) is a semi-two-dimensional model capable of computing alluvial scour/deposition through subcritical, supercritical,...

Selecting Sediment Transport Equation for Scour Simulation at Bridge Crossing
Gravel transport formulas were tested in order to select a formula for simulating stream channel changes of Stony Creek in northern California. At a stream reach undergoing scour, the...

Measurement of Bridge Scour at the SR-32 Crossing of the Sacramento River at Hamilton City, California, 1987-92
A study of the State Route 32 crossing of the Sacramento River near Hamilton City, California, is being made to determine those channel and bridge factors that contribute to scour at the...

Importance of Hydraulic-Model Uncertainty in Flood-Stage Estimation
The delineation of the regulatory floodplain and determination of the respective flood stage is subject to hydraulic-model uncertainty in transforming the design discharge into a flood...

Instrumentation for Detailed Bridge-Scour Measurements
A portable instrumentation system is being developed to obtain channel bathymetry during floods for detailed bridge-scour measurements. Portable scour measuring systems have four components:...

Reference Surfaces for Bridge Scour Depths
Depth of scour is measured as the vertical distance between scoured channel geometry and a measurement reference surface. A scour depth measurement can have a wide range depending on the...

Uncertainty Analysis of the FEMA Method for Alluvial Fans
Distributary flow areas such as alluvial fans, bajadas, and alluvial slopes, and alluvial plains along mountain bases pose quite different and interesting problems for the design of hydraulic...

The Courant Number and Unsteady Flow Computation
The Courant number C, the key to unsteady flow computation, is a ratio of physical wave velocity, ?, to computational signal-transmission velocity, ?, i.e., C = ?/?. In this way, it uniquely...

Sediment and Water Quality Control Devices in Small Watersheds
The physical behavior and health of an alluvial stream depends on the extent of man's interferences in its tributary areas. In its natural setting a stream provides three main functions...

 

 

 

 

Return to search