ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

n Values for Shallow Flow in Rough Channels
Manning's friction factor n has been developed from flume data for very shallow open channel flow in a high-gradient channel with large bed material. n values are presented as a function...

Laplace Valve Stroking to Control Water Hammer
The method of Laplace valve stroking to control water hammer is presented. Attention is directed to the most frequently encountered of the simple systems: a single pipe originating at...

Friction Loss Equations for Hydropower Facilities
Many water suppliers are pursuing economic benefits from water supply and distribution systems through development of hydropower facilities on pipelines. Excessive pressure head that used...

Friction in Debris Flows: Inferences from Large-scale Flume Experiments
A recently constructed flume, 95 m long and 2 m wide, permits systematic experimentation with unsteady, nonuniform flows of poorly sorted geological debris. Preliminary experiments with...

Distorted Physical Models for Mixing Studies
The frictional resistance and mixing process affected by roughness bars are investigated. Specific combinations of the size and layout of the bars for various flow conditions are suggested...

Mixing Character and Meandering Mechanism of a Plane Jet Bounded in a Shallow Water Layer
A plane jet in a shallow water layer is characterized by the jet width b₁/2 much larger than the water depth h at large downstream distances x/h...

The Challenge of Operating Roped Shuttles on Curved Guideways
Guideway curvature creates design challenges unique to roped people mover systems. These challenges include: Positioning large numbers of rope support sheaves along the guideway to support...

Drilled Shaft Friction Evaluation via Pullout Tests
The history, development, and field test results of a small-scale 'pullout' test to assess the skin friction (f_su) for drilled shafts socketed in...

Negative Skin Friction Due to Wetting of Unsaturated Soil
A steel building at a cement plant un Utah was originally supported by spread footings. Shallow wetting of the coarse granular soils supporting the footings resulted in over three inches...

Fracture Toughness Model of Fiber Reinforced Ceramics
This paper addresses the fracture resistance mechanism in fiber reinforced ceramics, and focuses attention on the specific effects associated with the nonlinear nature of the fiber pullout...

Multiple Modes of Steady-State Slide-Rock Response
The dynamic response of free standing rigid bodies to base excitation can be quite complex, as evidenced by the five motions or modes to be considered in a two-dimensional analysis: rest,...

Stochastic Response of a Caster-Mounted System
The response statistics of a caster-mounted system with white noise excitation are estimated using the generalized equivalent linearization method. The displacement and velocity covariances...

Actively Controlled P-F Based Sliding Structures
This study summarizes about three years of research effort related to active control of sliding structures to both harmonic and strong earthquake type motions. This is the first time such...

Frictional Aspect of Rocking-Sliding of a Rigid Block with Surface Impact
During the very short time of impact between a rigid rectangular block and a rigid foundation, the interface pressure distribution varies with time in a complicated manner. Due to this...

Computer Simulation of Direct Shear Test
This paper presents a pilot study of a computer simulation of direct shear test on sands using the Discrete Element Method. The numerical test setup is described first, which is followed...

Computational Gradient Plasticity
The inclusion of higher-order deformation gradients is of paramount importance for properly describing strain localization within the framework of continuum mechanics. In this contribution...

Determination of Interfacial Shear and Normal Stresses in Fiber Pull-Out
In this paper we present an improved formulation for the pullout problem, wherein both the effects of fiber end condition and interfacial and frictional shear stresses are considered....

Studies Related to Aircraft/Runway Friction Performance
Gaining a better understanding of the many factors influencing the tire/runway friction interface is the aim of several ongoing NASA Langley research programs. Results from studies conducted...

Skin Friction Distrtibutions on Piles in Sand
Presented in this paper are early results from an analytical investigation of the performance of a closed-ended pipe pile under monotonic axial loading in dense sand. The study was performed...

Network Modeling in a Water System with Ferrous Deposits
This paper presents the experiences and results of a network modeling study. A model for the University of Idaho water supply system was developed and verified to the extent possible with...

 

 

 

 

Return to search