A Modern Approach to the Design of Grassed Channels
The design of grassed channels can be based on modern fluid mechanics principles. The resistance to flow in a grassed channel is linked directly to the relative roughness of the flow through...
Effect of Water Depth and Groundwater Table on Infiltration from Recharge Basins
The actual effect of water depth on infiltration depends on the depth to groundwater and on whether the wetted perimeter of the basin is clean or covered by a clogging layer of fine particles...
An Evaluation of the Large Mammal Entry/Escape Steps Coachella Canal In-Place Lining Project
This study evaluated the effectiveness of a new system of large mammal entry/escape steps as part of the environmental investigations for the Coachella Canal In-place Lining Prototype,...
Design of Steel Transmission Pole Structures
Comparison of Design Rainfall Criteria for the Southwest
The design of drainage and flood control facilities or the management of floodplains for alluvial fans is extremely sensitive to the design rainfall criteria that is used as input to the...
Inclusion of Wetlands in Designated Floodway Studies
The purpose of this paper is to propose a change in the traditional methods and procedures used by hydrologist and hydraulic engineers to define floodways and floodway fringe areas. We...
Predicting Stream Width and Bank Retreat
The width of streams is dependent on the flood flow discharge which varies from year to year, the bank material which varies from stream to stream and reach to reach, the sediment load...
Hydraulic Bridge Design for Movable Bed Conditions
This paper addresses the practical considerations of hydraulic design of a bridge under movable bed conditions. Hydraulic design tasks include pier and abutment scour calculations, design...
Alignment of Large Flood-Peaks on Arid Watersheds
Bridge and culvert design requires estimates for 25- to 100-year return period flood peaks (Q). Floodplain delineation calls for 500-year (Q500) estimates. Arid western flood series are...
Resistance Consisting of Both Viscous Force and Dispersive Force
A set of specially designed experiments have been carried for studying the resistance of a flow consisting of water and both fine and coarse particles. The viscous force caused by fine...
Graphics Advances Aid Flood Engineers
In the last decade options have been suggested to the Log-Pearson III (LP3) computation for predicting design flood behavior in semi-arid conditions. Observations from an ongoing study...
The Sorry State of Flood Hydrology in the Arid Southwest
Flood hydrology for urban areas of the arid and semiarid Southwest is in a sorry state. It is based in large part on precomputer manual methods. The state-of-the-art should move into the...
Design Storms and Sizing of Flood Control Facilities
Design stroms which embody the rainfall characteristics of an area are used for the sizing of drainage facilities. The selection of a design strom may significantly influence the design...
Example of the Stable Channel Design Approach
This paper shows an example application of a new method being packaged by the US Army Engineer Waterways Experiment Station to aid in the design of stable flood-control channels. A stable...
Environmental Design of Channels?Can It Be Done?
The importance of environmental features to channel design is generally accepted and procedures for incorporating environmental features into flood control channel design have been developed....
Stable Channel Analytical Design Method
The Flood-Control Channels Research Program is being conducted at the US Army Engineer Waterways Experiment Station to develop systematic methods for design of stable channels for small...
Guidance on the Selection and Use of Sediment Discharge Formulas
The purpose of this paper is to discuss the sediment function module of the computer program SAM. SAM is being developed as a product of the US Army Corps of Engineers Flood Control Channels...
Optimal Design of Highway Drainage Structures
Hydraulic design of a bridge or culvert using a risk-based approach is to choose among the alternatives the one associated with the least total expected cost. In this paper, the risk-based...
Conservativeness in Hydraulic Engineering Studies
Hydraulic engineers routinely make a variety of assumptions during the course of a study. Assumptions, once made, usually become incorporated into the fabric of the study and are seldom...
Design and Construction of Soil-Cement Drop Structures
Soil-cement has been used as an effective and economical slope protection material for embankment dams and stream banks. This paper describes the use of soil-cement in the construction...
Return to search