Poisson Instability of Laminated Composite Plates
The paper considers the uniaxial buckling of rectangular, anisotropic composite laminates with in-plane restrained unloaded edges where Poisson's effect is predominant to...
Sensitivity Analysis of Connection Stiffness in Orthogonal Frames with End-Plate Connections
According to AISC-LRFD specification (1986), two types of construction for steel frame structure can be assumed which are Type PR (partially restrained) and FR (fully restrained) constructions....
Buckling of Frames with Load-Dependent Supports
The supports of frames may increase their rotational resistance as they are compressed. It is assumed here that this stiffening is a linear function of the load. Sway and nonsway buckling...
Methodology for Developing an Engineering Solution for Web Crippling
This paper describes the methodology used to develop an engineering solution for web crippling of aluminum trapezoidal sections. The development has two steps. The functional form for...
Stability Analysis of Nonlinear Frames
The second stiffness method for large deformation in-elastic stability analysis of frames is discussed. Displacement control methods for tracing the path beyond the limit point are presented....
Ultimate Loads of Steel Frames with Imperfections
As for real structures, initial geometric imperfections are inevitable and may have a destabilizing effect on the structures. The present research deals with the study of this imperfections...
A Second Order Analysis Technique for Nonprismatic Bridge Piers
An approximate second order method is presented for the analysis and design of cantilever compression members. Prismatic members with nonconstant reinforcement, and nonprismatic members...
Computational Failure Analysis of Reinforced Concrete Plate Structures
The paper summarizes our recent effort in developing a suitable finite element code for the failure prediction of reinforced concrete structures. The basis of the development is a plasticity...
Thermal Effects in a Transient Study of Fracture
Studies, e.g. Zehnder and Rosakis (1989), indicate that fracture is associated with temperature rises in inelastic zones near the crack edge. To gain more insight into this phenomenon,...
Nonlinear Response of Ground Supported Slabs
Refined techniques for the structural analysis of ground supported concrete slabs are presented. The principles of limit state design in terms of strength and serviceability are implemented....
Safe-Load-Limit of Plates in Cylindrical Bending
The derivation of a closed-form expression for the viscoelastic critical load of long thin plates undergoing cylindrical bending and made of a linear time-dependent 'solid'-type...
Analysis of a CMC Compact Tension Specimen
A cohesive force model is applied to study the stability of fiber failure in a ceramic matrix composite compact tension specimen. By controlling the length of the bridged crack results...
Design Considerations for Large-Scale Filament-Wound Composite Structures
An experimental investigation was conducted to quantify scaling effects in filament-wound composite structures. These preliminary results support the notion that an increase in thickness...
Elastic Stability of a Laminated Column
Buckling load of an unsymmetric, laminated column is obtained through the use of imperfection method. The condition requiring to have non-vanishing bending moment at the ends of a pinned-pinned...
A Damping Model for the Vibration of Nonlinear Laminated Composite Cylindrical Panels with High Order Transverse Shears
The damping characteristics of nonlinear vibration of a cylindrical panel including large displacements/rotations and parabolic transverse shears has been discussed in this study. The...
On the Adhesive Strength of Viscoelastic Fibrous Composites
A methodology for solving problems of anisotropic materials using the theory of elasticity (viscoelasticity) is presented. Some results on specific problems related to the stressed-and-deformed...
Finite Element Analysis and Testing of a Laminated Composite Fuselage Test Structure
A test structure modeling a full scale section of a composite aircraft fuselage was designed, analyzed, fabricated, and pressure tested. The test structure consisted of a cylindrical graphite...
Flexural and Extensional Motion of Moderately Thick Laminated Composite Plates
A general theory of flexural and extensional motion of moderately thick laminated composite plates is developed for linear elastic materials and small deformation. Interlaminar stresses...
Damage Tolerance of Composites
The damage tolerance issue in composites is driven by the requirement for and implementation of a structural integrity criterion for a structural system. A key element in the design philosophy...
On the Design of Laminated Composite Flange: A Model with Experimental Verification
A parametric model has been developed for the optimum design of laminated composite flange. The study focuses on the evaluation and performance optimization of composite flanges with the...
Return to search